Quick Detail
Place of Origin
HS-CODE
85-
Package & Delivery Lead Time
Detailed Description
Compact size, simple and convenient installation, high acceptance sensitivity
Industrial RS232 to 485communication protocol converter
RS232 to RS485 232-485
RS232/RS485/RS-422converter, code converter, protocol converter
RS232/RS485/RS-422
RS232/RS485/ RS-422 photoelectric isolation converter
RS232RS485/422//232/485/422232/485/422
RS232 to RS485/422 activeand passive optical isolation converter/repeater/to 232/485/422and fiber optic to 232/485/422
RS-232,,RS-232,15.,RS-232RS-422/485,RS-232RS-422RS-485,1.2km.
At present, lots of important equipment still uses RS-232 interface design. But RS-232 is a point to pointinterface, which limits the transmission distance between equipment andcomputer to 15m. To overcome the limitation, many users adopt the RS-232 to RS-422/485converter and connect RS-232 equipment to industrial RS-422 or RS-485 network, of which the transmission distance is over 12km whiletransmitting data.
RS-422RS-232/RS-422,,,,.RS-232TXDRTSDTR,TXD..
RS-422 is a general RS-232/RS-422 converter with low cost, using mini exterior designand equipped with pluggable terminals,so it enjoys simple and convenient installation andcompact size. It can take power from TXDRTS and DTRsignals of RS-232 interface, and can also operate normally even if there isonly TXD signal supplying power. It is widely used in such systems as attendancechecking, entrance guard, PTZ control, meal sellingand park lot etc.
feature
,,.
Compact size, simple and convenient installation, high acceptance sensitivity
,
Thetechnology to take power from specific serial port with on need for additional power
,,
Extremelylow power consumption ensures that serial port can still work normally whenthree lines are operating,
DSAC,
UseDSAC technique to distinguishand control data transmission direction automatically
.
Automatically detectserial signal speed rate
communication target
EIARS-232,RS-422 RS-232TX,RX,GND
In accordance with EIARS-232,RS-422standard RS-232 signals TX,RX,GND
RS-422T+,T-,R+,R-,GND
RS-422 signals T+, T-, R+,R-, GND
:,,4
Working mode: asynchronous operation, point to point, 4-wirefull-duplex
DSAC,,300-115200bps,
Direction controluses DSAC technique to distinguish and control data transmission direction automatically.The baud rate ranges from 300bps to 115200bps. And serialsignal speed rate is detected automatically.
:RS-4221200(115200bps),RS-2325
Transmissiondistance of load capacity: 1200m of RS-422 terminal (at the baud rate of 115200bps), recommended no morethan 5 m of RS-232 terminal
:600W15KV
Interfaceprotection: 600W surge protection, 15KVstatic electricity protection
:RS-232DB-9,RS-422DB-93
Interfacetype: DB-9 female of RS-232 terminal, DB-9male or 3 terminal of RS-422 terminal
environmental target
:-2070
Workingtemperature: -2070
:-4085
Storagetemperature: -4085
:5%95%
Comparativehumidity: 5%95%
Powersupply target: input power
,RS-232TXDRTSDTR10mA,40mA
Noneed for external power supply. Capture power consumption from TXDRTS and DTR signals of RS-232 interface with staticpower within 10mA and dynamic power within 40mA in average.
2. 9v/350ma,3kv,0-115200bps,3000,128,,RS-232RS-422/RS-232RS-485.,,,,,
It is connectedwith external 9v/350ma power supply with optical isolation of 3kv and speedrate from 0 to 115200bps. It can prolong communication distance 300m and support128 contacts. Full-duplex communication supports the transfer from RS-232 to RS-422/RS-232to RS-485. It is widely used in industrial automatic control system, card accesscontrol system, parking lot system, automatic bank system, automobile chargingsystem, attendance management system and toll station system etc.