Spray Booth (BTD 7500)

Quick Detail

Package & Delivery Lead Time

Detailed Description

Specification（European design） Outside Size:（mm）7110 x 5570 x 3810 mm （L x W x H） Inside Size：（mm）7000 x 4000 x 2800 mm （L x W x H） Basement Basement :Full metal foundation, full grids, the grids are suppressive type of steel grating instead of traditional twisted steel for the cross bar steel grating. The biggest features for it are beautiful, durable and better force bearing. Surface area of foundation:27 M² (full grids) Metal basement:350mm height, the ventilation effect is better than traditional spray booth. Drive-in Ramps:3Units, each size: 2000x1030mm, diamond plate construction Wall and Door Wallboard and Roof Panel Adopt high quality double construction fireproof insulation EPS panel, thickness: 50mm 3-Folded Entrance Door With Safety Glass Window:1 set, size: 3200x2700 mm（B x H）, size is bigger than traditional spray booth -Operator’s Door With Safety Glass Window Big opening：800x2000mm (B x H)，hand-made, tempering glass observation window Light System Ceiling Lighting:8Units, each4×36w, total 1152W , the grade of lighting box’s dustproof and waterproof reach IP54 grade. Side Lighting:8Units, each2×36W, total 576W, grade of lighting box’s dustproof and waterproof reach IP54 grade. Brightness:≥1000 LUX Filtration System Pre-filters EU3 grade pocket filter system, filtration effect is much better Ceiling Filters EU5 grade high efficient filter Bottom filter & exhaust filter: Fiberglass paint-stop filter Ventilation System Inlet fan (Direct Drive Motor):Adopt big impeller turbo fan 7.5KW ，380V，50HZ，CE Outlet fan (Direct Drive Motor):Adopt big impeller turbo fan 7.5KW ，380V，50HZ，CE Painting and baking exchange system:Solenoid valve+ pressure adjustment control cylinder driven damper exchange Fan Capacity 25.000m³/h Air Flow Speed :0.23 m/s in empty booth, 0.25－0.35m/s in loaded booth Heating System Heating Exchanger: Adopt high efficient heat-resistant stainless steel as cycling heat exchanger Heating Exchange Capacity:200KW(260.000Kcal/H) Burner Model: Adopt Italy RIELLO diesel burner RG5S, (260.000kal/H), quicker heating and much better effect, more rest assure for quality Heating time:3-5 minutes( from 20°C to 60°C) under baking status, the max baking temperature is 80°C Control board Control system :Standard Y/Δ step-down start control system PLC controller :Yes, PLC control, more reliable and lower breakdown rate Pressure testing :The pressure gauge indicate the pressure inside cabin Function Painting, warm painting, baking, emergency stop switch, alarm indication, failure indication, over-temperature alarm indication, baking delay stop protection

Basic Company Information

BTD Company

Company Advantage

Detail Company Introduction