Tension and angle tower

Quick Detail

Package & Delivery Lead Time

Detailed Description

Transmission tower structures can be classified by the way in which they support the line conductors. Tension and angle tower structures resist net tension in the conductors and the conductors attach to the structure through strain insulators, and where a line must change directions. Tension and angle tower was located between every three or four suspension tower to pull the conductors which are re-tied in tension tower insulators. They are used in high voltage AC and DC systems as well as railway traction, and come in a wide variety of shapes and sizes. MEGATRO can design and produce every type of tension and angel tower, which mainly used in power transmission line project. MEGATRO fabricates every structure tension and angle tower by solid steel legs and angle iron cross members & pipes. Structures can reach heights up to 200 meter. MEGATRO is one of the few manufactures who assemble a face of every tower section. This attention to quality may not be the cheapest process but it does insure every tower meets our high standards of quality. And it helps to reduce on-site construction cost due to mismatched assemblies. After fabrication all tension and angle tower are delivered to the galvanizing facility to be Hot DIP Galvanized. Towers are processed through the facility by Caustic Cleaning, Pickling, and then Fluxing. These strict procedures insure years of maintenance free towers. MEGATRO's termination tower systems can accommodate a variety of cross-arm. MEGATRO also offers a wide variety of accessories and mounts. Availability size: Based on the customer's requirements. Material: Chinese material or as per clients requirement Package: Both parties discuss before delivery Terms of Payment: L/C, T/T Minimum Order Quantity: 10tons Port of Loading: Qingdao Port Lead Time: One month or based on the customer's needs Performance Standard Besides conform to the drawing and design, the materials and fabrication of tower components shall conform to the Chinese Standard or other standard which clients can accept. Besides conform to the drawing and design, the materials and fabrication of tower components shall conform to the following standards (Chinese Standard or other standard): 1. GB/T2694-2003 Transmission line tower - - Technical requirements for manufacturing 2. JGJ81-2002: Technical specification for welding for steel structure of building 3. GB9787-88: Measuring and allowable tolerance for hot-rolled equal angle 4. GB709-88: Measuring and allowable tolerance for hot-rolled plate and strip 5. GB/T699-1999: Quality Carbon Structural Steel 6. GB/T1591-1994: Low alloy high strength structural Steel 7. GB700-88: Carbon Structural Steel 8. GB222-84: Method of sampling steel for determination of chemical composition and permissible variations 9. GB/T228-2002: Method for Tensile testing of metals 10 GB/T232-1999: Method for Bending test of metals 11 GB/T5117-1995: Carbon Welding Rod 12 GB/T5118-1995: Low Alloy Welding Rod 13 GB/T8110-1995: Welding wires for gas shielding arc welding of carbon and low alloy steels 14 GB/T10045-2001: Carbon steel flux cored electrodes for arc welding 15 JB/T7949-1999: Weld outer dimensions for steel construction 16 GB50205-2001: Test Standard for Acceptance of Steel Structure 17 GB/T470-1997: Zinc Ingot 18 GB3098.1-2000: Mechanical properties of fasteners-Part 1: Bolts, screws and studs 19 GB3098.2-2000: Mechanical properties of fasteners-Part2: Nuts, and thread 20 GB3098.3-2000: Mechanical properties of fasteners-Part3: Fastening screw 21 GB/T5780-2000: Helical Bolts Grade C 22 GB/T41-2000: Helical Nuts Grade C 23 GB/T90-2002: Flat Washer Grade C 24 GB/T13912-2002: Metal Coating, Technical Requirement We also adopt British, American and other international standard which client can accept.

Basic Company Information

Qingdao Megatro Mechanical and Electrical Equipmen

Company Advantage

Detail Company Introduction