Key factors in electric vehicle charging rate and charging cable selection

China [CN]

Sales leads USP: 1. Current carrying capacity: The charging rate is directly related to the current, so the charging cable must be able to withstand the corresponding current. For example, if an electric vehicle supports high-power fast charging, then the charging cable needs to have a higher current-carrying capacity. Generally, high-power fast charging requires a larger current, which requires a larger conductor cross-sectional area of ​​the charging cable to ensure that excessive heat is not generated during the transmission process, thus avoiding safety hazards.

2. Voltage level: The charging voltage of electric vehicles is also an important consideration in selecting charging cables. The charging voltage of different electric vehicles may be different, so the appropriate charging cable needs to be selected according to the specific charging voltage. If the voltage level of the charging cable is lower than the charging voltage of the electric vehicle, it may result in low charging efficiency or even no charging.

3. Material requirements: In order to meet the demand for high-power fast charging, the material of the charging cable also needs to have high conductivity and heat resistance. Common conductive materials include copper and aluminum. Copper has better conductivity, but its cost is relatively high. Heat-resistant materials need to be able to withstand long-term work in high-temperature environments to ensure the safety and stability of the charging cable.

4. Safety standards: The safety standards of charging cables are also very important considerations. In order to ensure safety during the charging process, charging cables need to comply with relevant safety standards and regulations. For example, charging cables need to have safety features such as anti-short circuit and anti-leakage to ensure that no harm is caused to electric vehicles or people during the charging process.

5. Length and diameter: The length and diameter of the charging cable will also affect the charging rate. Generally speaking, the shorter the cable length and the larger the diameter, the higher the charging rate. Because the longer the cable length, the greater the resistance, which will lead to increased energy loss and thus affect the charging rate. The larger the diameter of the cable, the larger the cross-sectional area of ​​the conductor and the greater the current that can be transmitted, thereby increasing the charging rate.

To sum up, the charging rate of electric vehicles has very strict requirements for the selection of charging cables, and many aspects such as current carrying capacity, voltage level, material requirements, safety standards, length and diameter, and compatibility need to be considered. Only by choosing the right charging cable can you ensure fast, efficient and safe charging of electric vehicles.

For more about EV battery cable and EV charging high-voltage cable information,Please visit OMG’s

official website: https://www.omgevcable.com