Corner-Run Steel Pole for overhead power tranmission

본문 바로가기


Home > Product > Corner-Run Steel Pole for overhead power tranmission
Product
Corner-Run Steel Pole for overhead power tranmission
Posting date : Feb 25, 2014
Membership
Free Member Scince Feb 17, 2014
Keyword :
Category
Contact
          0 likes     
Product Detail
Company Info
 
Quick Detail
Place of Origin
HS-CODE
85-
Package & Delivery Lead Time
Detailed Description
MEGATRO can design and produce every type of corner-run steel pole, which mainly used in power transmission line project. Corner-run steel pole is used when the overhead power line directions changed, and is connected to substation equipment, or transitions to underground cable. They are used in middle voltage and lower voltage systems such as 232KV, 220KV, 132KV, 110KV, 69KV, 66KV, 35KV, 11KV as well as railway traction, and come in a wide variety of shapes and sizes. Corner-run steel pole supports the full weight of the conductor and also all the tension in it, and also use strain insulators. Where the power transmission line must change direction, then Corner-run steel pole are used. Structures are classified as angle suspension, angle strain, and angle dead-end. MEGATRO fabricates every structure Corner-run steel pole by solid steel members & pipes. Structures can reach heights up to 60 meter, even higher as per client requirements. MEGATRO is one of the few manufactures who assemble a face of every tower section. This attention to quality may not be the cheapest process but it does insure every tower meets our high standards of quality. And it helps to reduce on-site construction cost due to mismatched assemblies. After fabrication all Corner-run steel poles are delivered to the galvanizing facility to be Hot DIP Galvanized. Towers are processed through the facility by Caustic Cleaning, Pickling, and then Fluxing. These strict procedures insure years of maintenance free towers. MEGATRO's Corner-run steel poles systems can accommodate a variety of cross-arm. MEGATRO also offers a wide variety of accessories and mounts. Availability size: Based on the customer's requirements. Material: Chinese material or as per clients requirement Package: Both parties discuss before delivery Terms of Payment: L/C, T/T Minimum Order Quantity: 10tons Port of Loading: Qingdao Port Lead Time: One month or based on the customer's needs Performance Standard Besides conform to the drawing and design, the materials and fabrication of tower components shall conform to the Chinese Standard or other standard which clients can accept. Besides conform to the drawing and design, the materials and fabrication of tower components shall conform to the following standards (Chinese Standard or other standard): 1. GB/T2694-2003 Transmission line tower - - Technical requirements for manufacturing 2. JGJ81-2002: Technical specification for welding for steel structure of building 3. GB9787-88: Measuring and allowable tolerance for hot-rolled equal angle 4. GB709-88: Measuring and allowable tolerance for hot-rolled plate and strip 5. GB/T699-1999: Quality Carbon Structural Steel 6. GB/T1591-1994: Low alloy high strength structural Steel 7. GB700-88: Carbon Structural Steel 8. GB222-84: Method of sampling steel for determination of chemical composition and permissible variations 9. GB/T228-2002: Method for Tensile testing of metals 10 GB/T232-1999: Method for Bending test of metals 11 GB/T5117-1995: Carbon Welding Rod 12 GB/T5118-1995: Low Alloy Welding Rod 13 GB/T8110-1995: Welding wires for gas shielding arc welding of carbon and low alloy steels 14 GB/T10045-2001: Carbon steel flux cored electrodes for arc welding 15 JB/T7949-1999: Weld outer dimensions for steel construction 16 GB50205-2001: Test Standard for Acceptance of Steel Structure 17 GB/T470-1997: Zinc Ingot 18 GB3098.1-2000: Mechanical properties of fasteners-Part 1: Bolts, screws and studs 19 GB3098.2-2000: Mechanical properties of fasteners-Part2: Nuts, and thread 20 GB3098.3-2000: Mechanical properties of fasteners-Part3: Fastening screw 21 GB/T5780-2000: Helical Bolts Grade C 22 GB/T41-2000: Helical Nuts Grade C 23 GB/T90-2002: Flat Washer Grade C 24 GB/T13912-2002: Metal Coating, Technical Requirement We also adopt British, American and other international standard which client can accept.

ECROBOT CO., Ltd, Business Registration Number : 220-88-71747, CEO J.W.Park, TEL : +82-2-552-7676, E-mail : E-mail : Contact us
Address : (Hwanghwa B/D 11F, Yeoksam-dong)320, Gangnam-daero, Gangnam-gu, Seoul, South Korea
About Us Privacy Policy Terms of use Copyright © 2000-2024 ECROBOT.COM. All rights reserved.
Top