HDMI Extender over single CAT5E/6 120M

Quick Detail

Package & Delivery Lead Time

Detailed Description

HDMI Extender over single CAT5E/6 120M 1.0 Introduction HDMI Extender is based on TCP/IP standard. It extends your HD display with the high resolutions up to 395 feet (120 meters) away from your HDMI or DVI-D source by using one CAT5e/6 cable. HDMI Extender support 3 transmission mode, point-to-point mode, one point-to-many mode and cascade connection. HDMI Extender Built-in IR extender function allows IR remote control of Source devices from remote viewing location by sending IR commands received in the vicinity of the Display back to the Source devices. 2.0 Specifications 1.Following TCP/IP standard. 2.Support HDMI1.3 protocol. 3.HDCP1.1 & 1.2 protocol compliant 4.Support point-to-point mode, one point-to-many mode and cascade connection mode. 5.Support IR extender function allows IR remote control of Source devices from remote viewing location by sending IR commands received in the vicinity of the Display back to the Source devices. HDTV Resolutions : 640X480 @ 60fps 800X600 @ 60fps 1024X600 @ 60fps 1024X768 @ 60fps 1152X864 @ 60fps 1280X600 @ 60fps 1280X720 @ 60fps 1280X768 @ 60fps 1280X800 @ 60fps 1280X960 @ 60fps 1280X1024 @ 60fps 1440X1050 @ 60fps 1440X900 @ 60fps 1600x900 @ 60fps 1660X1200 @ 60fps 1680x1050 @ 60fps 1920X1080 @ 60fps 1920 x1200 @ 60fps Audio: Sample rateÖ 32kHz, 44.1kHz and 48kHz 38KHz; Inferred remote control : NEC HDMI Extender HDMI: HDMI 1.3 HDCP: HDCP 1.2 Power adapter: Input: 100V - 240V (50 - 60Hz) Output: 5V/1A Power consumption: HDMI TX: 3W HDMI RX: 3W Size(L-W-H): 100×60×25mm Weight : 70g Operating: Temperature/Humidity 0 - 70 / 10% - 80%RH(no condensation) Storage Temperature/Humidity -10 - 80 / 5% -90% RH(no condensation) 3.0 Connection and operation 1) Connect the HDMI source (such as DVD, PS3, STB ) to the HDMI INPUT of Sender. 2) Connect the IR sender to the Sender IR OUT Port, and Be Directed at HDMI video source’s IR receiver. 3) Connect the HDMI out of Receiver to HDTV display. 4) Connect the IR receiver to the Receiver IR INPUT Port. 5) Use one Cat5e/6 cable up to 120m to connect the Sender and Receiver. 6) Plug two pieces of 5V power supply into the Sender and Receiver. 7) Power on the HDTV display and HDMI source.

Basic Company Information

Shenzhen Videoconn Electronics Co, Ltd

Company Advantage

Detail Company Introduction