Quick Detail
Place of Origin
HS-CODE
84-
Package & Delivery Lead Time
Detailed Description
ZP-12C mine sprinkler dust device with touch sensor
The sensor probe using imported components, at the same time equipped with sensitivity adjustment, time delay, the dust in coal mine is the preferred equipment.
Technical parameters:
1, Work input voltage:127V,incoming current:=<310mA,AC frequency:50HZ;
2, Voltage range: nominal value 80%-120%;
3, Ann output:12V/480mA(rated value);
4, Largest open circuit voltage: 0:12.5V; Maximum short circuit current 10:480mA Capacity C0:16uF; Inductance: L0:0.2mH.
5, Control signal input: switch signal;
6, scope of solenoid valve pressure application:0.2MPa-4.0MPa;
7, adaptor sensor delay action time (1-45) s;
8, Maximum transmission distance of sensor to the host:200m;
9, Protection way: double over voltage, over current protection;
10, Works: continuous power supply. Sensors in the coal mine wages oh environmental conditions:
1, Ambient temperature: 0-40 degree;
2, RH(relative air humidity)<= 95%(25degree). 1
3, Atmospheric pressure: 86KPa-106KPa.
4, Gas and coal dust explosion gas for the dangerous sites,no corrosive gas environment.
5, Place of no violent vibration and impact, But able to withstand the vibration of 500 m/s2 peak acceleration.
6, Size of PCB sensor circuit board:40*45(mm); PCB circuit line width<=0.35mm; PCB board thickness:1.2 mm. Space between circuit lines>=0.7mm; Coated insulating paint twice after the processing.
7, Sensors delay adjustment range(1-45)s. Bias: ±3s
Madery
Jining Hengwang Mining Machinery Co.,Ltd.
E-mail: maderyhengwang AT hotmail.com
Skype: maderyhengwang Mob: +86-13668679003
0 likes
Click enlarge Image
