Quick Detail
Place of Origin
HS-CODE
85-
Package & Delivery Lead Time
Detailed Description
Features:
1.Repeatability Better than 0.2%
2.Accuracy :±1% of reading at rates>0.2 mps
3.Response Time: 0-999 seconds, user-configurable
4.Velocity:±32 m/s
5.Totalizer: 7-digit totals for net, positive and negative flow
respectively
6.Liquid Types :Virtually all liquids
7.Security Setup values Modification Lockout. Access code needs
unlocking
8.Display 4x8 Chinese characters or 4x16 English letters,display
instant flow,velocity,total flow,signal status
9.Signal output Non-isolation RS232(FUJI extention protocol) ,one
channel isolation OCT output
10.Transducers Clamp on type transducers
11.Transducer Cord Length Standard 2x10 meters, optional 2x 500 meters
12.Power Supply 3 AAA Ni-H built-in batteries. When fully recharged it will
last over 12 hours of operation.
13.100V-240VAC for the charger
14.Data Logger Built-in data logger can store over 2000 lines of data
15.Housing Material ABS
16.Case Size 100x66x20mm
17.Handset Weight 514g (1.2 lbs) with batteries
Technology features:
1:operating power:isolation 8-36VDC
2:current: 50mA(under the condition of connection without keyboard display and sound of buzzer)
3: signal output: one channel standard isolation RS485 output
One channel isolation 4-20mA or 0-20mA passive output.
Two channel OCT output(programmed between the pulse
width(6-1000ms),default before leaving factory (200ms))
4: signal input: two channel three wire system PT100 platinum resistor input loop,to make heat
meter has the function of displaying heat quantity.
Three channel 4-20mA input optional,accuracy:0.1%,has the ability to input the
signals of pressure, liquid level, temperature and so on.
5:display:2*10 backlit LCD,displaying instant flow rate,velocity,positive,negative,net totaliser
flow rate.
6:operating: 4 keypad tactile keyboard operating
7:other functions: automatic memory the positive,negative,net totaliser or flow rate and heat
quantity of the last 512 days,128 months,10years .Automatic memory the time of power on/off and flow rate of the last 30 times, realize to replenish by hand or automatically,read the datas through Modbus communication protocol.
8:protection level:IP57
9:transducer:clamp-on type,insertion type,in-line type.
Optional accessory:
1:clamp-on transducer(standard S1 type,standard M1 type,high temperature S1H,high temperature
M1H)
2:insertion transducer(standard insertion B,cement insertion B)
3:in-line type transducer(hygienic type,standard type)
4:remote second times operation meter(wall-mounted type,panel-mounted type)
5:PT100 there wire platinum resistor(used for heat meter)
6: strap(applied with installation of transducers on cast iron,GRP,PVC,etc. that can not be welded
directly.
7: special shielded twisted pair cable
8: ultrasonic thickness gauge(measure the thickness of pipe,reduce error,increase accuracy)