High quality Denso AC Compressor for BMW 64529222308 6SEU14C

High quality Denso AC Compressor for BMW 64529222308      

Specification:

INTL-XZC1018

Manufacturer Number: DCP05098

Number of Ribs: 6Belt Pulley  [mm]: 110Pulleys: with v-ribbed belt pulleyInlet  [mm]: 28,4Outlet  [mm]: 15,4Oil Fill Quantity [ml]: 150Compressor ID: 6SEU14C

Special Notes:

BWK495,

64529222308,

1201479,

437100-6830,

447150-2660,

447150-6280,

447260-4700,

8FK 351 002-351,

32864G 

Basic Requirements when servicing an A/C system:

1, The Accumulator or Filter Drier should always be replaced when the Air Conditioning System is opened. For warranty Purposes buyer must show evidence of receiver/drier replacement. In some vehicles the drier comes attached to the condenser so it must replaced as well

2. A/C system must be clean and free of debris and contaminants. In most cases components can be flushed; however in some instances it may be necessary to replace the condenser or other items.

3. Orifice tube must be replaced; expansion valve must be inspected and replaced if dirty or defective.

4. Correct amount and type of oil must be used. Please refer to the OE manufacturer for this information.

5. Prior to refrigerant charging, full vacuum must be done for a minimum of 45 minutes. In humid climates or during cooler days, this time should be increased to effectively remove air and boil off moisture.

6. The Orifice Tube, if equipped, should always be replaced and the Expansion Valve, if equipped, should at least be inspected for proper operation if not replaced