24V1.5A 36W ZF120A-2401500

Quick Detail

Package & Delivery Lead Time

Detailed Description

1、（SCOPE）24V1.5A36W： The purpose of the document is to specify the functional requirements of a 36W switching power supply. 2、（INPUT CHARACTERISTICS）： 2.1 (Input Voltage): (Nominal Voltage):100-240Vac （Variation Range）:90-264Vac 2.2（Input Frequency）: （Nominal Frequency）:50/60Hz （Variation Frequency）:47-63Hz 2.3 (Input Current): 1Arms max At any input voltage and rated, DC output rated load. 2.4 (Inrush Current): 30Amps Max. Cold start at 240Vac input, with rated load and 25℃ambient. 2.5 (Ac Leakage Current): 25mA Max At 240Vac input. 3、（OUTPUT CHARACTERISTICS）： 3.1 (Power Output); Voltage Min. Load Max. Load Peak Output Power +24Vdc 0A 1.5A 1.6A 36W 3.2 (Combined Load/Line Regulation): Voltage Min. Voltage Max. Voltage Line Regulation Load Regulation +24Vdc 24. 0V 25.2V ±5% ±5% 3.3（Ripple And Noise）: The ripple and noise are as follows when measure with Max. Bandwidth of 20MHz and Parallel 47uF/0.1uF,crossed connected at testing point. Voltage Ripple And Noise(Max.) +24Vdc 130.5mVp-p 3.4 (Turn On Delay Time): 2 second Max. At 115Vac input and output Max. Load. 3.5 (Rise Time): 40mS Max. At 115Vac input and output Max. Load. 3.6 (Hold Up Time): 5mS Min. At 115Vac input and output Max. Load. 3.7 (Efficiency): 80%Min.At 100Vac input and output Max. Load. 83%Min.At 240Vac input and output Max. Load. 3.8 (Overshoot): 15%Max.When power supply at turn on or turn off. 3.9 No-load loss is not more than 0.5W . 4、 (PROTECTION REQUIREMENT): 4.1Short Circuit Protection: The power supply will be auto recovered when short circuit faults remove. 4.2 (Over current Protection)：The power supply will be auto recovered when over current faults remove. 4.3 (Over Voltage Protection) The power supply will not be auto recovered when faults remove. 5、 (ENVIRONMENTAL REQUIREMET): 5.1 (Operating Temperature): 0℃to40℃,Full load Normal operation. 5.2 (Storage Temperature):-20℃to85℃, (With package). 5.3 (Relative Humidity):5%(0℃)～90%(40℃)RH,72Hrs,Full load Normal operating. 5.4 (Vibration): 1、Operating: IEC 721-3-3 3M3 5～9Hz,A=1.5mm（9～200Hz,Acceleration 5m/s2） 2、（Transportation）： IEC 721-3-2 2M2 5-9Hz，A=3.5mm 9～200Hz, Acceleration=5m/S2 200～500HZ, Acceleration=15m/S2 3、（Axes,10 cycles per axis）.No permanent damage may occur during testing. 4、The product has to restors its original situation after power off/on.) 5.5 (Dropping)(Packed):1 corner,3 edges, and 6 surfaces Height:76cm 6、 (SAFETY AND EMC REQUIREMENT): 6.1 Match Standard with UL CE GS SAA ROHS 6.2 (DIELECTRIC STRENGTH)(H-Pot)： (Primary to secondary),3000Vac/5mA/60s. 7、 (MECHANICAL REQUIREMENT)： 7.1 (Enclosure):The power supply size L: 119*52*34MM 7.2 (Input Connector): 7.3;Output DC cable: AWM 1185 20AWG*2C，VW-1，80℃，FTI，300V，with word on the cord, Length:1.2M, with the conector:5.5*2.5 8、(Label): Material: PVC Endure heat above110℃ Thickness:0.2-0.3mm 3*RI±0.1mm 3*RI±0.1mm Angle 2.5mm 9、PACKING White inner box+out carton White inner box out side dimension LxWxH(195x85x75) Tolerance:±3

Basic Company Information

WEIDAYUAN TECHNOLOGY CO.,LTD

Company Advantage

Detail Company Introduction