Quick Detail
Place of Origin
HS-CODE
85-
Package & Delivery Lead Time
Detailed Description
Quick Details
Place of Origin: China (Mainland) Brand Name: WINNER Model Number: WIN-V63 VF control: AC drive .Packaging & Delivery
Packaging Details: wooden case ..............(AC drive)(Frequency Inverter)(VFD)(frequency converter)..............
Delivery Detail: 1 weeks
.
Specifications
Voltage : 380V Single-unit power : 1.5-400kW (frequency inverter)
......AC drive,frequency inverter, frequency converter......
1. Open-loop vector control
2. built-in braking chopper for 45kw or below, external DC choke for 93kw or above
3. Built-in PLC,Built-in PID regulator
4. 16-step speed
5. traverse operation
6. Continuous operation function at momentary power failure
7. Perfect fault protection and auto current limit
8. Positive/negative logic switch input signal for option
9. 43 input terminals and 25 output terminals for option
10. 10 frequency input modes
11. Autotuning function in the mode of either standby or operation
12. RS-485 communication port (MODBUS protocol)
13. Ethernet cable for keypad.
Item
description
input
Rated voltage, frequency
Single phase,220V,50Hz/60Hz; 3 phase, 380V,50Hz/60Hz
Allowed fluctuation
Continuous voltage fluctuation:within±10%, instant voltage fluctuation: within -15%10%; voltage imbalance: <3%; frequency fluctuation: within 5%.
output
Voltage
Single phase,0220V; 3 phase,0380V
Output frequency
0400Hz.
Overload capability
150% rated current,2 minutes; 180% rated current,10 seconds
control trait
Command input mode
By LCD keypad, by terminals, by PC through serial communication port.
Control mode
Open loop vector control, VF control.
Speed setting method
By keypad, by analog, by PC through serial communication port
Speed setting precision
Digital command±0.01%(-10 +40)
analog command±0.1%(25oC±10)
Speed setting resolution
Digital command:0.01Hz; analog command:1/2000 of maximum frequency
Speed control precision
Open loop vector control: ±0.5%; (25±10
Speed control range
Open loop vector control: 1:100
Torque control response
Open loop vector control:<200ms.
Start torque
Open loop vector control:150% of rated torque at 0.5Hz.
Torque control precision
±5%
Set reference voltage supply output
1 port, +10V, 5mA
Control voltage supply output
24V,100mA
Analogy input
2 ports, AI1 voltage: 010V, AI2 current/optional voltage010V/020mA AC.
Analog meter output
2 ports,010V/020mZ DC, current/voltage optional
Operation command connector input
2 ports, FWD: forward operation, REV: reverse operation
Programmable connector input
X1X8, 8 ports, programmable digital signal input terminals, X7 and X8 can accept high-speed pulse signal(3.7KW or below, X1X5, 5 ports, X4 and X5 are high speed input)
DO frequency signal output
1 port, high-frequency signal output(programmable)
Collector open-loop output
Two ports:Y1,Y2. Y2 can be selected as pulse output(3.7KW or below, only Y1 available)
Programmable relay output
1 port RA/RB/RC, contactor capacity: 250V AC/3A or 30V DC/1A
Serial communication port
cRS-485 connector RS485+,RS485-
4 bits LED display
setting frequency, output frequency, output voltage, output current, motor speed, output torque, switch value terminal, programming menu parameters and fault code.
Five indication lamp
Parameter unit, RUN/STOP status, special status, charging status.
Protection function
Protection function
Over voltage, under voltage, current limitation, over current, overload of inverter, overload of motor, overheat, overvoltage stallout, load short circuit, phase fault.
Protection degree
IP20
Cooling mode
Forced air cooling
envirenment
Ambient termearture
-10,+40
Termperature
2090% RH(no condensation)
Storage termperature
-20,+70
Application area
indoor(no corrosive odor, dust)
Installation area
Altitude is not more than 1000meter, no dust, no corrosive oder, no direct sunlight.
Vibration
20Hz less than 9.8m/s2(0.2g)
0 likes
Click enlarge Image
