Pure sine wave inverter

Quick Detail

Package & Delivery Lead Time

Detailed Description

R series Pure sine wave inverter Key features: 1. Front panel LED indicators and adjustable switch selectors 2. Selectable settings for flooded lead acid, gel, or absorbed glass mat (AGM) batteries 3. 70A automatic 3-stage battery charging (bulk, absorption, and float) for increased performance 4. Low battery, overload, and high battery, over temperature protection circuitry 5. Fast switching (grid to battery and battery to grid) for backup power 6. Low idle current (less than one watt) conserves energy when no loads are present 7. Durable construction for long life under extreme environmental conditions 8. Simplified controls with a snap-on cover that protects settings from being accidentally changed 9. Better thermal performance allows full output power to 50°C (122°F) without de-rating 10. 3:1 surge capability starts more difficult loads and handles overload conditions reliably 11. Circuit boards are conformably-coated to protect them from corrosion for longer life & improved reliability 12. Durable powder coated, corrosion resistant steel chassis 13. Generator compatible Technical specifications: General specifications: Input wave form: Sine wave(Utility or generator) Nominal voltage: 120VAC 230VAC Low voltage trip: 90V+/-4% 184V/154V+/4%- Low voltage re engage: 100V+/-4% 196V/164+/-4% High voltage trip: 140V+/-4% 253V+/-4% High voltage re engage: 135V+/-4% 243V+/-4% Max input AC voltage: 150VAC 270VAC Nominal input frequency: 50Hz or 60Hz(Auto detect) Low frequency trip: 47Hz for 50Hz, 57Hz for 60Hz High frequency trip: 55Hz for 50Hz, 65Hz for 60Hz Output wave form: (Bypass mode) same as input Overload protection: Circuit breaker Short circuit protection: Circuit breaker Transfer switch rating: 30 amp or 40 amp Efficiency on line transfer mode: 95%+ Line transfer time: 10 ms typical Bypass without battery connected: Yes Max bypass current: 30 amp or 40 amp Bypass over load current: 35 amp or 45 amp: alarm Inverter specification/output Output wave form: Pure sine wave or quasi sine wave Output continuous power watts: 1000 2000 3000 4000 5000 6000 Output continuous power VA: 1000 2000 3000 4000 5000 6000 Power factor: 0.9-1.0 Nominal output voltage rms: 120/230VAC Output voltage regulation: +-/10% rms Output frequency: 50Hz+/-0.3Hz or 60Hz+/-0.3Hz Nominal efficiency: >88% Surge ratings: 3000 6000 9000 12000 15000 18000 Short circuit protection: Yes, fault after 10 secs Inverter specification/input: Nominal input voltage: 12V 24V 48V Minimum start voltage: 10V 20V 40V Low battery alarm: 10.5V 21V 42V Low battery trip: 10V 20V 40V High voltage alarm: 16V 32V 64V Power saver: Below 25 watts when enabled Power saver: Same switched on/off on remote Charger mode specifications: Input voltage range: 95-127VAC 194-243VAC/164-243VAC(W) Output voltage: Dependent on battery type Charger current: 35A/70A Battery initial voltage for start up: 0-15.7V for 12V(*2 for 24V; *4 for 48V) Over charger protection shutdown: 15.7V for 12V(*2 for 24V; *4 for 48V) Charger curves (4 stage constant current) battery types 4 steps digital controlled progressive charge Battery type: Fast V Float V(*2 for 24V; *4 for 48V) GEL U.S.A. 14.0 13.7 A.G.M. 1 14.1 13.4 A.G.M. 2 14.6 13.7 Sealed lead acid 14.4 13.6 GEL Euro 14.4 13.8 Open lead acid 14.8 13.3 Calcium 15.1 13.6 De-sulphation 15.5 for 4 hrs Remote control/RS232/USB Yes, optional Size: in mm 1000/2000/3000 model: 442*218*179 mm3 4000/5000/6000 model: 598*218*179 mm3 Net weight: 1000 2000 3000 4000 5000 6000 18Kg 20Kg 22Kg 35Kg 38Kg 40Kg

Basic Company Information

SHEN ZHEN POCASA ELECTRONIC LIMITED

Company Advantage

Detail Company Introduction