Quick Detail
Place of Origin
HS-CODE
85-
Package & Delivery Lead Time
Detailed Description
Product Introduction
This 200M Wallmount can provide the transmission of broadband data service via power line, which are suitable for use in a wide range of both residential (in-home) and commercial (offices, apartments, hotels, warehouses) network applications in which existing power lines can be utilized. There is never any need to install new wires. These adapters enable the effortless creation of a high-speed network that supports video, voice and data.
Wallmount type and power voltage range of 85 to 265 VAC 50/60Hz
HomePlug AV compliant, Co-existence with HomePlug 1.0 Nodes
Support QAM 1024 /256 / 64 / 16 / 8, QPSK, BPSK, and ROBO modulation schemes
Up to 200 Mbps data rate on the power line.
128-bit AES Link Encryption with key management for secure power line communications
Windowed OFDM with noise mitigation based on patented line synchronization echniques improves data integrity in noisy conditions
Dynamic channel adaptation and channel estimation maximizes throughput in harsh channel conditions
TDMA and priority-based CSMA/CA channel access schemes maximize efficiency and throughput
Integrated Quality of Service (QoS) Enhancements: Contention-free access, our-level priority based contention access, and multi segment bursting
ToS and CoS Packet Classifiers
Supports IGMP managed multicast sessions
Application
High Definition (HD) and Standard Definition (SD) video distribution
Higher data rate broadband sharing for power line LAN
Shared broadband internet access
TV over IP (IPTV) and Voice over Internet Protocol (VoIP)
Parameter Specification
System SPEC
SDRAM 128Mbits
Serial Flash 16Mbits
Firmware Support North America/Europe/APAC/Japan
Feature and Technology SPEC
Protocol HomePlug AV 1.0
EEE 802.3 10/100 Ethernet (100Mbps
EEE 802.3u Fast Ethernet
Co-exists with existing HomePlug 1.0
System Support Windows 98SE, 2000, ME, XP 32/64 bit, Vista 32/64bit, Windows7 32/64bit
PLC Rate 200MB
Data Rate- TCP/UDP 65Mbps TCP
90Mbps UDP
Modulation Band 2-30MHz
Modulation Schemes Supports256/64/16/8-QAM, QPSK, BPSK and ROBO
Encryption 128 AES
QoS Support contention-free access, four-level priority based
Contention access, and multi segment bursting
Support VLAN Priority
Support ToS and CoS Packet Classifier
Work Mode TDMA and priority based CSMA/CA
Multicast Support Supports IGMP managed multicast sessions
IPv6 Support
SNMPv2 or v3 Support
Typical Coverage Up to 5000 square foot home
The actual Coverage will vary with the power grid and the number
Of PLC terminal device.
LED's Power
Ethernet: Ethernet Link and Activity
Data: PLC Link and Activity
Push Button RESET: Restore the default factory parameter
NMKSET: Set up network password automatically
Power Socket Support British, Euro, Japan, US and China power connector
Ethernet Interface 1 x RJ45 for 10/100 Ethernet (Auto MDI/MDI-X)
Consumption 4.0W
Environment Requirement
Operating Temperature 0to 45C
Storage Temperature -20 to 70 C
Operating Humidity 10% to 90% Non-condensing
Storage Humidity 5% to 90% Non-Condensing
Input Rating 100-240 VAC, 50/60Hz
EMC and Safety
Regulatory Compliance FCC Part 15 Class B
CE
Safety Regulations UL
Green Standard RoHS
Physical Dimension
Physical Characteristics L× W× H: 82mm*52mm*32mm
Weight 100g