Quick Detail
Place of Origin
HS-CODE
84-
Package & Delivery Lead Time
Detailed Description
Concrete Tube Making Machine
Detailed Product Description:
1) Using Roll shaft and steel model rotating produce their roll pressure and centrifugal force causes the materials compacting formation . can produce reinforced concrete pipes which internal diameter is 400-2500mm, and the length within 1000-5000mm.
2) The pipe enable the formation through the steam or the natural curing the tubing to achieve the standard level. The output shift is 15-20 sections.The machine easy to operate ,run steady, reliable and durable ,the failure rate is low.
3) Market:There are several moulds interfaces available to use on the machine, such as flat, I stand, jack and other commitments. The machines are sold worldwide such as Southeast Asia, Africa, and the Middle East.
4) Concrete Tube Forming Machine Configurations:
Machine Type: HXJ500-1000 Concrete Tube Forming Machine
Concrete Tube Diameters: 500-1000 mm
Concrete Tube Width: 1.7m
Concrete Tube Height: 1.6m
Concrete Tube Length: 3.8m
HLJ Model Vertical Extrusion Pipe Making Machine
1) Material: stone powder,(stone factory waste),sand, and add 20% cement
2) This machine can produce no reinforced cement pipe,which including holes or not,which internal diameter is 150-1000mm, and the length is 1000mm.
3) The control craft advanced, the anti-intrinsic pressure can reach 0.5Mpa.Various port pipe forming on primary, immediately knock out,
4) the total motor power is 11Kw,one shift need 6-8 workers, efficiency can reach to 10-20 sections per hour.
5) The pipe has characteristics high finish, prevent seepage. It can be widely suitable for farmland imitation, pump well ,miniature lift station, municipal drainage, highway culvert and so o n.
0 likes
Click enlarge Image
