Quick Detail
Place of Origin
HS-CODE
84-
Package & Delivery Lead Time
Detailed Description
Specifications
Temperature range: room temperature~250ºC
Temp. control accuracy: ±0.2ºC
Dwell pressure: 0.04MPa~0.8MPa
Dwell time: 0.1s~99s
Tack time: 0.1s~99s
Accuracy: ±1% of reading force
Measuring range: 0-300 N
Width of specimen: 15mm or 25 mm or 25.4 mm (Optional)
Length of specimen:: 200 mm
Dimension: 600mm(L) ×300mm(B) ×220mm(H)
Power: AC 220V 50Hz/60Hz
Net weight: 62kg
Features
GBR type Hot tack tester is applicable in hot tack property test for flexible and semi-rigid packaging materials or pipe materials.
The hot seal temperature, pressure and time can be set by users easily.
Temperature control system of digital P.I.D., with high accuracy.
Parallel heating surface, even temperature, good sealing efficiency.
International quality pressure control devices of higher accuracy.
Optional load cell range, easy to change and easy to broaden the test scope.
Perform many tests in different width by changing the specimen fixture quickly.
Test controlled by micro-computer, LED displays, with professional software.
Standards : ASTM F1921,ASTM F2029,QB/T 2358(ZBY 28004),YBB 00122003
Test principle
Clamp the two ends of the specimen by the static jaw and dynamic jaw, the driver moves the dynamic jaw, which produces relative movement. Tester gets electronic signal from the load cell after the specimen suffers the force. After analysis, get the data of hot tack, peel, and tension. It can print out the report if needed.
Note: Hot Tack Tester tests the strength of a specimen at a specified time interval (tack time) after completion of heat-sealing in melting state but prior to the temperature cooling down to room temperature.
Configuration
Standard: Mainframe, footswitch, hot tack clamp, calibration frame
Optional: software, communication cable, non-standard seal jaws, test board, Welding Cloak, non-standard jaws, sample cutter, non-standard specimen
0 likes
Click enlarge Image
