Quick Detail
Place of Origin
HS-CODE
44-
Package & Delivery Lead Time
Detailed Description
130/150W CO2 laser power supply
1.Main features:
1.High output voltage and current: When imputing AC220V and outputting current up to 38MA, the voltage can be up to 25KV.
2.Response time: ≤ 1Ms ( from the time that switch signal is given to the output current up to 90% of the setting current )
3.Increase the power of laser: The peak of laser power can be up to 150W and the average power is 130W.
4.Dramatically lengthen the service of laser.
5.Easy Control: The start and stop of laser can be easily controlled by TTL level. And there are protection switch to test the external water, ventilation, etc.
6.Easy control of laser power: Both 0-5V analog signal and PWM signal can control the laser power.
7.The power supply has the function of open circuit protection: Under the condition of good protective earth, the power supply can work in open-circuit condition for a short time, which could avoid the damage of laser power supply because of the bursting of the laser tube, thereby enhance the life of power supply.
8.The power supply can take feedback interface which can be used in closed-loop control and testing the working current of laser.
9.The power supply adds a new function, that is timely scene judging which part is damaged, laser tube or laser power.
10.Application: Cutting of thick acrylic, wood and so on.
2.Specification:
Input
Input voltage
AC220V or AC110V
AC frequency
47-440HZ
Cold surge current
≤ 60A (AC220V Input)
≤30A (AC110V Input)
Current leakage
≤0.7MA (AC220V Input)
≤0.4MA (AC110V Input)
Output
Maximum Input Voltage
DC50KV
Maximum Output Current
DC38MA
Efficiency
≥ 90% (Full load)
Mean time between failure
≥1000H
Response speed
≤1 ms (from the switch signal is given to the output current up to 90% of the setting current)
Control interface
TTL level switch control, high or low effective level can be chosen (details refer to the control terminal specification)
Pressure-proof
Input-Output, Input-Shell: AC1500V 10MA 60S, Output negative is connected with machine shell.
Protection
Can work in open-circuit condition for a short time ( Require a good protective earth and avoid arc between the positive and machine shell)
Environment
Operating temperature: -30C- +65C, Relative Humidity (RH): ≤ 90%
Cooling way
Force-Air Cooling (FAC)
Dimension
L×W×H=325×240×95(mm)
Bearing
1.Needle bearing
2.Deep groove ball bearing
3.Spherical roller bearing
4.Self-aligning ball bearings
5.Angular contact thrust bearings
6.Thrust ball bearings
7.Thrust cylindrical roller bearings
8.Tapered Roller Bearings Thrust
9.Cylindrical roller bearings
10.Tapered Roller Bearings
11.Wheel bearings
12.Angular contact bearings
Laser power supply and tube
1.40W Laser Power
2.40W Laser Power
3.80W Laser Power
4.100W Laser Power
DC Motor
1.DC permanent magnet motor
2.DC rare earth motors
3.Servo motor
4.Geared Motor
AC/DC Motor driver
1.DC motor speed controller
2.AC motor speed controller
3.Pulse width governor
4.SCR governor
5.Servo motor speed controller
More ProductsCopyRight @ 2012-2013 Jinan Shengtuo Mechanical and Electrical Equipment Co., Ltd. All rights reserved
ADDRESS:Jiaheng Business Building, Hualong
0 likes
Click enlarge Image
