Quick Detail
Place of Origin
HS-CODE
85-
Package & Delivery Lead Time
Detailed Description
50 Watts of Power Output
The ham car radio provides a hefty 50 Watts of power otput, with "low power" settings of 25, 10, and 5 Watts, for situations where full power is not required.
Extended Receiver Coverage
The ham car radio provides receiver coverage of 400-470 MHz, so you can listen in on a wide variety of commercial, military, public safety, and marine communications.
Illuminated Microphone with Keyboard Frequency Entry
The supplied MH-48a6j DTMF Microphone is illuminated for eas of nighttime use, and you may enter operating frequencies directly from the keypad. What`s more, memory channels may also be recalled directly via the keypad.
221 Memory channels with Alpha-numeric Labeling
The ham car radio`s extensive memory system includes 200 regular memories, ten pairs of band-limit memories, and a one-touch "Home" channel. Memory channels store repeater offset information, as well as CTCSS or DCS data, and can have a six-character label appended, for quick channel recognition. And the memories may be allocated into as many as eight memory banks, for more efficient scanning.
Dedicated 10-channel NOAA Weather Broadcast Channel Bank (U.S. version)
Included in the car radio a dedicated, quick-access memory bank that contains the ten standard NOAA Weather Information Channels, so you can keep track of weather conditions expected for your area.
Programmable "Soft" Keys
Four user-programmable "soft" keys are provided on the MH-48a6j microphone, allowing you to bring often-used Menu items, or front panel key functions, to your fingertips.
Built-in CTCSS and DCS Encoder/Decoder Circuits
The ham car radio includes both CTCSS and DCS Encoder/Decoder circuitry, with Reverse CTCSS Decoding also available, to mute your receiver when a particular tone is received (instead of opening your squelch). And you can encode CTCSS and decode DCS, or vice versa, too, if your application requires it.
Adjustable Mic Gain and Wide/Narrow Deviation and RX Bandwidth
The microphone gain for the ham car radio`s transmitter is adjustable, so you can optimize it for your voice level as well as background noise in your operating location. And for operation in crowded channel environments, the TX deviation and RX bandwidth may both be reduced via the Menu.
CW Trainer
You can practice your Morse Code recognition, using this novel trainer that sends you five-character code groups, with variable speed and instant feedback as to the correct characters sent to you.
Security Password to Prevent Unauthorized Use
A defeatable (by the owner) Security Password system is provided for the ham car radio, so you can limit operational access to yourself and any other users (if any) informed of the password for the transceiver.
Easy Access to YAESU`s Renowned WiRES-II™ Internet Linking Nodes
A front panel key provides instant access to WiRES-II nodes. More information about WiRES, Yaesu`s exciting and fun way to communicate via Amateur Radio AND the Internet, may be found at the WiRES-II Web site: .
Specification of ham car radio
GENERAL
Frequency Range Receive:
400-470MHz.
Frequency Range Transmit:
400-470 MHz
Channel Steps:
5/10/12.5/15/20/25/50/100 kHz
Frequency Stability:
Better than ±10 ppm (-20°C to +60°C)
Mode of Emission:
F2D/F3E
Antenna Impedance:
50 Ohm, Unbalanced
Operating temp range:
-4° to +140°F (-20°C to +60°C)
Supply Voltage:
DC 13.8V ±10%, Negative Ground
Current Consumption (typical):
RX:
Less than 0.7A (max. audio)
Less than 0.3A (Squelched)
TX:
10A (50W) / 7A (25W) / 5A (10W) / 4A (5W)
Operating Temperature Range:
-20°C to +60°C (-4°F to +140°F)
Case Size:
5.6 x 1.6 x 5.8 inches (w/o knobs)
140(W) x 40(H) x 146(D) mm
Weight:
4.0 lb. (1.8kg)
TRANSMITTER
RF Power Output:
50/25/10/5 Watts
Modulation Type:
Variable Reactance
Maximum Deviation:
±5 kHz / ±2.5 kHz
Spurious Radiation:
Better than -60dB
Microphone Impedance:
2 K Ohm
RECEIVER
Circuit Type:
Double-Conversion Superheterodyne
Intermediate Frequencies:
21.7 MHz and 450 kHz
Sensitivity (12dB SINAD):
Better than 0.2uV
Selectivity: (-6/-60 dB):
12 kHz/28 kHz
IF Rejection:
Better than 70 dB
Image Rejection:
Better than 70 dB
Maximum AF Output:
3 W into 4 Ohm @ 10% THD
Specifications are subject to change without notice, and are guaranteed within amateur bands only.
Frequency ranges and repeater shift vary according to transceiver version
0 likes
Click enlarge Image
