Quick Detail
Place of Origin
HS-CODE
84-
Package & Delivery Lead Time
Detailed Description
Functions of car radio
65W* of output power
A MOS-FET power amplifier provides 65W* of stable output power. A one piece, aluminum chassis helps to keep the transceiver cool and provides durable long-lasting construction.
* Depending on version
Optional digital unit, UT-118
The optional UT-118 provides digitally modulated and demodulated clear voice and data communication at 4.8kbps. Store up to 6 of your own callsigns, and up to 6 more from other stations. Or instead of recording a callsign, record any message of up to 20 characters. You may then make a call by sending one of your callsigns or a recorded CQ message. The digital callsign squelch allows you to choose an incoming call selected by the callsign. When connected to an external GPS receiver*, position information may be exchanged with other stations.
* NMEA 0183 output and RS-232C interface are required.
Simple operation
The car radio retains a familiar user interface to the IC-2100H. The large tuning dial provides easy access to active channels even without looking at the front panel. Secondary functions are easily recalled by holding the appropriate button.
Dynamic Memory Scan (DMS)
With a total of 207 alphanumeric memory channels, Icom’s exclusive DMS system allows you to scan selected memory banks by simply adding and deleting bank links.
CTCSS and DTCS operation standard
The car radio contains 50 CTCSS and 104×2 DTCS encode/decode plus tone scan functions. The “pocket beep” feature gives you an audible and visual indicator of an incoming call.
And more…
24 DTMF autodial memories
DTMF code squelch and pager function with optional DTMF decoder, UT-108
Weather channel with weather alert function
U.S.A. version only
FM narrow mode switchable
Depending on version
Selectable squelch delay
Built-in 10dB squelch attenuator
Specification of car radio
General
Mode
FM, AM(Rx only)
No. of memory channels
207 (incl., 6 scan edges, 1 call channel)
Operating Temp. range
–10°C to +60°C
+14°F to +140°F
Frequency stability
±10 ppm –10°C to +60°C
Power supply requirement
13.8 V DC ±15% (negative ground)
Current drain
Tx
at 65W
15 A
Rx
Max Audio
1.0 A
Standby
0.8 A
Antenna connector
SO-239 (50Ω)
Dimensions
(projections not included)
140(W) × 40(H) × 146(D) mm;
5 1/2(W) × 1 9/16(H) × 7 3/4(D) in
Weight
1.25 kg; 2.75 lb
Transmitter
Output power
Korea version
Taiwan version
65, 25*, 10*, 5*W selectable
50, 25*, 10*, 5*W selectable
24, 10*, 5*W selectable
*approx.
Maximum frequency
±5.0 / ±2.5 kHz deviation (wide/narrow)
Spurious emission
–70 dBc typical.
Microphone connector
8-pin modular (600Ω)
Receiver
Receive system
Double-conversion super heterodyne system
Intermediate frequencies
1st
2nd
21.7 MHz
450 kHz
Receive Sensitivity
0.133µV typical (at 12dB SINAD)
Squelch sensitivity
0.100µV typical (threshold)
Selectivity
Wide
Narrow
More than 6 kHz at -6dB
Less than 14 kHz at -60dB
More than 3 kHz at -6dB
Less than 9 kHz at -55 dB
Spurious and image rejection
More than 60dB
Audio output power
(at 13.8 V DC)
More than 2.4W at 10% distortion at 8Ω
Ext SP connector
3-connector 3.5 (d) mm (1/8″)