Icom professional dual band mobile transceiver IC 2720H

Quick Detail

Package & Delivery Lead Time

Detailed Description

General Frequency coverage Transmit (USA Version) VHF: 144-148 MHz UHF: 440-450 MHz Frequency coverage Receive (USA Version) Left Side: 118-550 MHz Right Side: 118-174, 375-850, 810-999.99 MHz (less cellular) Mode: FM, AM* (* U.S.A. version, RX only; 118-136 MHz; not guaranteed.) Number of memory channels: 212 (including 2 call and 10 band edge channels) Antenna connector: SO-239 (50 ohms) Power Supply requirement: 13.8 V DC ±15% Useable temperature range: +14 to +140 , -10 to +60 Frequency stability: ±10 ppm Tuning step increments: 5, 10, 12.5, 15, 20, 25, 30 and 50 kHz Current drain (at 13.8 V DC) Receive squelched 1.2 Amps Maximum audio output 1.8 Amps Transmit at high power VHF 12 Amps, UHF 11 Amps Main Unit Dimensions (projections not included): 5.5 x 1.65 x 7.4 inches 2.6 Lbs (140x40x187 mm 1.17 kg). Controller Dimensions (projections not included): 5.5 x 2 x 1.2 inches 6 ounces (140x50x27 mm 150 g). Transmitter Output power: VHF 50 W, 15 W, 5 W selectable UHF 35 W, 15 W, 5 W selectable Modulation system: variable reactance frequency modulation Max. frequency deviation: ±5.0 kHz Spurious emissions: Less than -60 dB Microphone connector: 8-pin modular jack (600 ohms) Receiver Receive system: Double conversion superheterodyne Intermediate frequencies (Left/Right): 1st 38.85/450 kHz 2nd 46.05 MHz/455 kHz Sensitivity: Less than 0.18 micro V for 12dB SINAD Squelch Sensitivity: 0.13 micro V (at threshold) Selectivity: More than 12 kHz -6 dB Less than 30 kHz -60dB Spurious rejection ratio: More than 60 dB Audio output (at 13.8 V DC): More than 2.4 W at 10% distortion with an 8-ohm load Ext. speaker connector: 2-conductor 1/8" (3.5 mm), 8 ohms Specifications are subject to change without notice or obligation. Features V/V, U/U simultaneous receive capability The mobile transceiver is a unique dual band mobile, providing VHF/VHF, UHF/UHF simultaneous receive capability along with VHF/UHF duplex operation. Simple touch of a button changes the transmit band Independent controls for each band Operating two bands simultaneously is very simple with Icom's symmetric layout with a wide LCD display showing both band settings in an easy to read side by side format. The mobile transceiver provides separate tuning, volume, squelch knobs and function buttons the left and right side bands. Also, listen to both bands independently through separate left and right band audio jacks. Dynamic Memory Scan (DMS) With 212 memory channels of mobile transceiver, Icom exclusive Dynamic Memory Scan system gives you flexibility over your scanning lists, fully customizable in 10 banks Wideband receiver Keep on top of what is happening with the mobile transceiver's wideband receiver. Covering from 118-549 and 810-99MHz*, you will be able to listen to almost any communications! DTCS and CTCSS The mobile transceiver incorporates 104? DTCS and 50 CTCSS tone codes along with a tone scan function. Don't miss out on communications because of not having the proper type of "tones"! The "pocket beep" feature gives you an audible and visible indicator of an incoming call. Compact, remote controller The controller with the 3.5m (11.5') separation cable is an easy to install two pieces configuration. This configuration offers the flexibility of mounting the controller while placing the main unit in an outof-the-way location without any additional cost. Microphone jacks are mounted both on the controller and main unit of the radio!

Basic Company Information

Fujian Quanzhou Zhongxun Electronic Technology .Co

Company Advantage

Detail Company Introduction