Quick Detail
Place of Origin
HS-CODE
85-
Package & Delivery Lead Time
Detailed Description
Summary
RFNT3 is a multi-function battery testing device, having the features below:
1)With one channel, supporting one intelligent battery
2)Supporting charge, discharge, test, capacity correction, charge / discharge 50% capacity
3)LCD for displaying battery informaiton
4)LED for indicating working status
5)With charge-key, discharge-key, backlight-key and function-key
6)Pre-charge, fast charge and constant voltage charge for charging stages and the variation range of the
values of the constant current and the constant voltage is less than 1%
7)Constant current for discharging
8)With a USB port for connecting with computers, master machine can monitoring and control slave machine
Basic Parameters
Dimensions: 201 x 99 x 35 mm
Weight: 333g
Adapter
Input: AC 100 ~ 240 V
Output: DC 24V 2.65A
Display mode
Segment LCD with white backlight + LED in red and green
Discharging mode
Constant current discharge for double loads, inner load & external load
Maximum charging current: 3A
Charging mode
Constant current and constant voltage are the main mode. Active charge and pre-charge are available
according to different battery voltage.
Standby power consumption
≤1W
Time
Time limit for charging: 8.8h
Time limit for discharging: 8.8h
Time limit for testing: 20s + 10s = chg + disc
Time limit for capacity correction: 8.8h + 20s + 8.8h = disc + pause + chg
Auto quit time for function menu: 10s
Function Introduction
Charge
Active, pre-charge, constant current and constant voltage are the stages of charging mode. The initial
charging mode depends on the battery voltage, so active and pre-charge don't happen to every batteries.
Discharge
Constant current discharge for double loads
Inner load: 0 ~ 1000mA, adjustable continuously via Battery Manager
default discharging current = 500mA
External load: 0mA, 500mA, 1000mA, 1500mA, 2000mA, five gears with dip switches offered
Tester will stop discharging if one of the conditions below is met.
Test
Testing time is 30 seconds and the purpose is to check both the charging and discharging performances.
After finishing test, LED flickers with green colour and LCD reports the test result.
Normal: Test OK Shown on LCD
Abnormal: Test NG Shown on LCD
Capacity Correction
The battery capacity value in the battery management chip will different from the actual capacity after a
battery goes through many recycling cycles. It will affect the use of the battery when the difference reaches
a certain degree. Capacity correction is to deep discharge a battery and then fully charge, which will correct
the capacity value in the battery management chip.
50% Capacity
CD50%: charge firstly, and then discharge to 50% capacity
DC50%: discharge firstly, and then charge to 50% capacity
Online Functions
Tester can be connected with master machine via a USB port. Users can monitor, control and set parameters
via Battery Manager software in the master machine.
Others
Active cooling
Active batteries of zero voltage
When a battery is deep discharged, the discharge protection circuit will start up and the voltage in the
battery connector will become zero voltage. In this case, an appropriate voltage should be supplied to
active the battery.
Battery identification
Battery information can be read from battery management chip after establishing communication.
Intelligent protection
Against over-current, over-voltage, over-charge, over-heat and short circuit.
Fan
Discharging mode: fan startup
Other modes: fan startup when temperature above 48â
fan stop working when temperature below 40
Trouble alarm
LED flickers in red colour and current command stops when one of the conditions below happen.
â³ There is not current for around 50 seconds when charge.
â³ There is not current for around 25 seconds when discharge.
â³ Charging time is above 8.8 hours.
â³ Discharging time is above 9.9 hours.
â Suitable for almost all laptop batteries, above 95%
Accessories
â 1 x load
â 1 x adapter
â 1 x USB cord
â 1 x CD
â 13 x connectors
â 10 x cables
â 10 x jumpers