Professional Line Array Speaker W8(CE,RoHS)

Quick Detail

Package & Delivery Lead Time

Detailed Description

DESCRIPTION and APPLICATION The W-8 is a line array system which is made of two 12” neodymium woofers, four 6.5” midrange speaker units, two 3” titanium neodymium compression drivers and high-performance low-distortion compression driver with innovative horn design of waves phase philosophy. It is a zero interfere line array with multi-speaker combined to produce accurate directivity and maximum dynamic impact. Its midrange speaker units are beset in treble horn board and two waves guide plates are set in between to eliminate its interfere.Each enclosure is equipped with rigging system, allowing flown array to be constructed rapidly and safely. Model W-8 Type Line array system Frequency Response 45Hz-20KHz±3dB Directivity index(DI) 12(±2)1.2KHz-16KHz Power handling LF 1200W(RMS)2400W(PEAK) MF 600W(RMS)1200W(PEAK) HF 200W(RMS)400W(PEAK) Sensitivity LF 101dB(1W1M) MF 104dB(1W1M) HF 111dB(1W1M) MaxS.P.L LF 132dB(PEAK/1M) MF 132dB(PEAK/1M) HF 134dB(PEAK/1M) LF section 2×12" (310mm)neodymium woofer 75mm(3in) coil Nominal impedance 8 ohm MF section 4×6.5" (170mm)neodymium MF 50mm(2in)coil Nominal impedance 16 ohm HF section 2×3"neodymium compression driver with 75mm titanium diaphragm Nominal impedance 16 ohm Output section 3-channel Dispersion pattern 110°H×7.5°V Finish Water-proof,wear-resistant textured black paint Array design Arrays of less than 3×CV-8 will provide poor dispersion control and are neither recommended nor supported Speaker cables LF 1(+)1(-) 2(+)2(-) MF 3(+)3(-) HF 4(+)4(-) Rigging system Please refer to the CV-8 user manual before any operation Input connectors 2×Neutrik NL8 Recommend crossover LF 45Hz-400Hz MF 400Hz-1200Hz HF 1200Hz-20KHz Dimensions 1100×405×595mm(W×H×D) Package dimensions 1170×475×665mm/0.37cbm Enclosure Birch Plywood Net weight 65kg Gross weight 69kg

Basic Company Information

Guangzhou CVR Pro Audio Factory

Company Advantage

Detail Company Introduction