Quick Detail
Place of Origin
HS-CODE
85-
Package & Delivery Lead Time
Detailed Description
The DN-C680 represents the best of CD player technology developed by Denon for studio and broadcast production applications, and makes a perfect match when combined with the DN-M1050R MD recorder. Since its basic design is the same as the DN-M1050R, the DN-C680 lends easily to the construction of a uniform operating environment.
Features
Index Search: The Select knob can be used to perform an Index Search when the INDEX button is ON (the LED on the INDEX button lights up).
Auto Space: During playback, it is possible to insert a silent space of about 4 seconds between tracks. To do this, simply press the AUTO SPACE button to ON (the LED on the AUTO SPACE button lights up).
Auto Edit: This function automatically divides the total recorded time on the disc in half and rearranges the tracks so that they fit neatly onto the A and B sides of a cassette tape.
Display of Playback Locations: A bar graph display indicates playback points on the track being played. Elapsed time and Remaining time displays are switched using the TIME button.
CD-R Reading Capability: DN-C680 reads CD-R discs with or without Table Of Contents (Note: some CD-Rs without TOC might not be readable)
19-inch Rack Mountable (Height: 3U)
Large FL Display, Illuminated Rubber Buttons
Track Search Select Knob (Easy track selection)
Jog Dial/Shuttle Wheel: Perform searches to 1 MD frame precision using the jog dial and easy scans using the shuttle ring.
Auto Cue: After a track is selected, it is automatically cued to the point where audio starts. Cueing takes place at the point where audio starts rather than where the track starts. The level at which sound is first detected can be set between -36 to -72 dB (7 steps).
End Monitor: Pressing the END MON button during standby instantly previews the end of the track, thus assuring perfect "outros". The point at which monitoring starts can be set within a range of 5 to 35 seconds (7 steps) prior to the track's end.
End Of Message (EOM): At the end of a track, the PLAY/PAUSE button flashes, providing a visual warning to the operator that the track will end shortly. The point at which the flashing begins can be set within a range of 0 to 30 seconds (7 steps) prior to the end of the track.
Pitch Control (±9.9%, 0.1% step)
Instant Start (Playback starts less than 0.01 seconds after the PLAY button is pressed.)
External Control Terminals:Serial Remote (RS-232C/RS-422A switchable, D-Sub 9-pin); Parallel Remote (D-Sub 25-pin) optional RC-680 remote
Sampling Rate Convertor Unit: ACD-25FSC (Option): Digital output is possible at 32 and 48 kHz as well as 44.1 kHz.
Technical Specifications
Type: Rack Mountable CD Player
Audio Channel: 2 channels (Playback: Stereo/Mono selectable)
Digital filter: 18-bit 8-times oversampling
D/A Converter: Dual 18-bit linear
Sampling Frequency: 44.1 kHz (32/48 kHz available using optional ACD-25FSC)
Total Harmonic Distortion: less than/equal to 0.003%
S/N ratio: greater than/equal to 105 dB (A-weighted)
Channel Separation: greater than/equal to 100 dB
Frequency Response: 5 Hz - 20 kHz ±1 dB
Headphone output: 20 mW (30 to 40 ohm)
Analog output (1 kHz, 0 dB playback) - Transfer and connector: Balanced active, XLR connector; Unbalanced, RCA connector
Analog output (1 kHz, 0 dB playback) - Output level: Balanced: +18 dBm (±0.5 dBm), 600 ohm; Unbalanced: 2 V, 10 kohm
Analog output (1 kHz, 0 dB playback) - Output level adj. range: +22 dBs to -20 dBm (Balanced)
Digital output - Transfer and connector: Balanced active, XLR connector; Unbalanced, RCA connector
Digital output - Signal format: AES/EBU or IEC-958 Type 2 or SPDIF
Digital output - Output level: Balanced: 3 Vp-p, 110 ohm; Unbalanced: 0.5 Vp-p, 75 ohm
Serial Remote: RS-232C/RS-422A (Switchable), D-Sub 9-pin
Parallel Remote: D-Sub 25-pin for optional RC-680 remote