iradio I-160ham radio/two way radio

본문 바로가기


Home > Product > iradio I-160ham radio/two way radio
Product
iradio I-160ham radio/two way radio
Posting date : Mar 31, 2010
Membership
Free Member Scince Mar 02, 2010
Keyword :
Category
Contact
          0 likes     
Product Detail
Company Info
 
Quick Detail
Place of Origin
HS-CODE
85-
Package & Delivery Lead Time
Detailed Description
•16 memory channels •39 CTCSS •Voice annunciation function •Super-save battery function •Frequency range: 400 to 420MHz, 450 to 470MHz Time-out Timer The purpose of the Time-out Timer is to prevent any single person from using a channel for an extended period of time. If you continuously transmit for 10 minutes,the transceiver will stop transmitting and a tone will sound.Top shop the tone,release the PTT swich. You can press the PTT switch again to resume transmitting. Battery Save The Battery Save function decreases the amount of operations are being performed (no keys are being pressed,and no switches are being turned). While the channel is not busy and no operation is performed for 10 seconds,Battery Save turns ON.When a signal is received or an operation is performed,Baterry Save turns OFF. Low Battery Warning Low Battery Qarning alerts you when the battery needs to be recharged. While transmitting,if the battery power goes below a per-dtermined value,the LED will blink red.When a toe sounds,the transceiver stops transmitting. Replace or recharge the battery pack. Monitor Qhen no signals are present,the squelch on the transceiver automatically mutes the speaker so you will ont hear background noise.Tomanually deactivate the squelch,press and hold the Monitor key.This is useful when you want to adjust the volume level,or when you need to hear a weak signal. The LED indicator lights green while the Monitor key is pressed. Quiet Talk(QT)and Dingital Quiet Talk(DQT) Some channeis may have pre-programmed QT/DQT tones,A QT/DQT tone is a subaudible tome which allows you to ignore (not hear)calls from other parties who are using the same channel. When you receive a signal that has a tone different from the one set up in your transceiver,you will not hear the signal.Linkewise,signals that you transmit will only be heard by parties whose QT/DQT tone matches the tone set up in your transceiver. SPECIFICATINOS Frequency range 400-420MHZ/450-470HMZ Rated Voltage DC7.4V(Li-ionbattery) Memory channel 16channnels Antenna disposition Inductively loaded antenna Antenna impedance 50Ω Working manner Same frequency single operation or different frequency single operation Ground method Negative pole Volume 100x50x28mm Lanching Parts Output power 3W/5W Modulation mode Frequency modulation Maximum frequency deviation ≤±5KHZ Remanent radiation <-60dB Preemphasis character Per fold frequency patch 6dB Emission current ≤1000mA Receiving Parts Sensitivity <0.16µV(12dB SINAD) Silent sensitivity <0.2µV Intel modulation anti-interference 50dB Audio frequency power ≥300mW Receiving current ≤100mA Silent watitng 20mA

ECROBOT CO., Ltd, Business Registration Number : 220-88-71747, CEO J.W.Park, TEL : +82-2-552-7676, E-mail : E-mail : Contact us
Address : (Hwanghwa B/D 11F, Yeoksam-dong)320, Gangnam-daero, Gangnam-gu, Seoul, South Korea
About Us Privacy Policy Terms of use Copyright © 2000-2024 ECROBOT.COM. All rights reserved.
Top