BC 1106 Microbiological Control Agent

Quick Detail

Package & Delivery Lead Time

Detailed Description

Water-based antimicrobial ◇ Description and Use BC 1106 is a microbial control agent approved for use in a variety of industrial water-based systems. BC 1106 contains 1.15% 5-chloro-2-methyl-4-isothiazolin-3-one and 0.35% 2-methyl-4- isothiazolin-3-one. This product is most effective as a bactericide, but will also control fungi and algae when used at higher dosages. BC 1106 aids in the control of bacterial, fungal, and algal slimes in evaporative condensers, heat exchange water systems, commercial and industrial cooling towers, influent systems, industrial water scrubbing systems, brewery pasteurizers, as well as industrial air washer systems equipped with mist eliminators. Control of microbiological populations in industrial water systems is essential to prevent biofouling. In cooling systems, biofouling of heat exchange equipment and tower fill reduces heat transfer efficiency and can force unscheduled shutdowns and extended turnarounds, leading to lost production. Biofouling can also damage equipment through microbiologically influenced corrosion (MIC). As a result of these effects, biofouling must be prevented in order for operating units to achieve profitability goals. Alternating feed of BC 1106 with another microbiological control agent (e.g., a Spectrus BC biocide product or an oxidizing biocide) will provide better long term control by reducing selection of resistant organisms. ◇ Treatment And Feeding Requirements BC 1106 is most effective when shot-fed to the system. Correct treatment levels and frequency of BC 1106 addition depend on many factors. These include, but are not limited to, system cleanliness, types of microbes, nutrient concentrations, temperature, pH, retention time, and other system operating characteristics. Consult the product label for general dosage guidelines. Microbiological monitoring is recommended to evaluate product requirements. Consult our representative for technical advice on your specific application. In all cases, this product must be applied in accordance with use instructions on the BC 1106 label. Feed Point—BC 1106 can be fed directly from the drum or diluted with water and fed by any suitable feed system. BC 1106 should be dosed directly into the sump or basin or other location where good distribution can be assured. In treating air washer systems, BC 1106 should be added to the air washer sump or chill water sump to ensure uniform mixing. Compatible Materials—BC 1106 is compatible with most plastics, fiberglass, ceramic, and feed equipment. Avoid: —304 and 316 stainless mild steel, copper, and brass lines and equipment. General Properties Physical properties of BC 1106 are shown on the Material Safety

Basic Company Information

Weihai Xiangyu Environmental Protection Technology

Company Advantage

Detail Company Introduction