Rolling Door Motor

Quick Detail

Package & Delivery Lead Time

Detailed Description

Main facture: 1. Gear-drive type door motor. 2. Input voltage: 220V(110V is alternative) ; Work voltage: 24V, security and no persona injury. 3. Power failure emergency device: manual clutch, rotary type operation, door can be locked at optional position, more durable. 4. Movement settings: mechanical type, door can be open and closed manually while power off, the limite space will not be changed. 5. Security protection devices: intelligent dynamic fully resistance determination, the door will rebound up and stop when it meet the resistance. 6. The function of setting automatic closing time is available, and the extension of time is 5 minutesthe function of time-delay lamp is available, the time-delay lamp will go out after the door stop. 7. The number of remote controller can be increased and decreased arbitrarily, each motor can equip up to 20 remote controllers, and each remote controller can control several doors at the same time or just one. 8. The motor controller and the motor are separated, its easy to install, operate and repair. and its no need to take down the door when you repair or replace the motor. 9. The internal structure of motor are made of pure metal, long service life. 10. 24V reserved power, IR protection and automatic warning function are alternative. Working environment and condition: 1. Environment temperature: -25ºC--+50ºC. 2. Relative humidity (RH) : the allowed Max relative humidity is 90%, while the environment temperature is +50ºC. 3.Power: single-phase alternating current (AC) 220V 50Hz (110V is alternative) . The voltage waviness amplitude range cant exceed ± of the rated range, and the frequency fluctuation range cant exceed ± of the reted range. Technical parameter: 1. Input voltage: 220V(110V is alternative) ;Working voltage: 24V. 2. Delivered power: 100W; Working noise: less than 50db; Maximum hoisting power: 800N. 3. Control mode: manum, electric, remote control; unloaded state speed: 25r/min. 4. Rated operating range of remote controller is 30m. Mounting dimensions (diagrams 1, 2) 1. Lead rail dimensions: The inward flange width should be in accordance with with that of the doorway; 2. Distance between supporting plates: Fix the bolster 5cm away the lead rail from the supporting plate or inner side; 3. Motor shaft dimensions: 8cm longer than the space between two brankets; if chose supporting plate, 4cm shorter than the space between two supporting plates; 4. Spring case: To measure 23cm inwards from two ends of the draft 5. Door curtain dimensions: The inside space of sliding chute subtract 4cm

Basic Company Information

Dashijie Windows and Doors CO.,LTD

Company Advantage

Detail Company Introduction