spherical roller bearings23220CC

Quick Detail

Package & Delivery Lead Time

Detailed Description

Spherical roller bearings are self-aligning function, but is also very strong. Spherical Roller Bearings are two rows of rollers, in the outer ring, there is a sharing of spherical roller Road, there are two Inner Raceway, with the bearing axial tilt into a relative perspective. This is the bearing attractive design features, in many demanding applications can not be replaced. KMR spherical roller bearings are open, sealed and applied to the specific application of bearings. We can produce the diameter from 20mm~1 800mm KMR spherical roller bearings. 25mm~220mm KMR sealed spherical roller bearings etc. Following is the internal structure of KMR different product descriptions. C2 Radial internal clearance smaller than Normal C3 Radial internal clearance greater than Normal C4 Radial internal clearance greater than C3 C5 Radial internal clearance greater than C4 CC Two window-type steel cages, flangeless inner ring andguide ring centred on the inner ring. CAME4 Machined brass cage, Out ring with lubrication holes and groove. 2CS Sheet steel reinforced contact seal of acrylonitrile-butadiene rubber (NBR) on both sides of the bearing. Annular groove and three lubrication holes in the outer ring covered with a polymer band. Lubricated with an extreme pressure bearing grease according to the table 2CS2 Sheet steel reinforced contact seal of fluoro rubber (FKM) on both sides of the bearing. Annular groove and three lubrication holes in the outer ring; Covered with a polymer band. Lubricated with a polyurea high-temperature grease 2CS5 Sheet steel reinforced contact seal of hydrogenated acrylonitrile-butadiene rubber (HNBR) on both sides of the bearing. Otherwise as 2CS2 E/A Enhanced design. EAE4 Enhanced design press steel cage, Out ring with lubrication holes and groove. M Machined brass cage, ball centred. MA Machined brass cage, outer ring centred. MB Machined brass cage, inner ring centred. HA3 Case-hardened inner ring K Tapered bore, taper 1: 12 K30 Tapered bore, taper 1: 30 S With an groove, lubrication holes in out rings. P5 Dimensional and running accuracy to ISO tolerance class 5 P6 Dimensional and running accuracy to ISO tolerance class 6 VA405 Bearings for vibratory applications with surface hardened cages VA406 VA405 and PTFE-coated bore VE552(E) Outer ring with three equally spaced threaded holes in one side face to accommodate hoisting tackle; The E indicates that appropriate eye bolts are supplied with the bearings VE553(E) As VE552 but with threaded holes in both side faces VG114 Surface hardened pressed steel cage VQ424 Running accuracy better than C08 VT143 Grease fill with an extreme pressure grease according to the table W Without annular groove and lubrication holes in outer ring W20 Three lubrication holes in outer ring W26 Six lubrication holes in inner ring W33 Annular groove and three lubrication holes in outer ring W77 Plugged W33 lubrication holes

Basic Company Information

ShanDong Camelry Bearing Science&Technology Co.,Lt

Company Advantage

Detail Company Introduction