roll forming machine for roof

Quick Detail

Package & Delivery Lead Time

Detailed Description

Self locked Roof panel roll forming machine is an updated version of traditional roll forming machine. Instead of using screws at joining position, the corrugated sheets produced by this line are Self-locked and have successfully solved the problem of leakage. The whole line consist of decoiler, sheet guiding equipment, roll forming system, cutting equipment, hydraulic station, electric controlling system, and runout table. The corrugated sheets produced by this line are strong and durable with high ribs. The joining type of these sheets is self-lock, which makes it easy to install and safe with excellent water proof and storm resistance. The products are widely used as the roof of factory, warehouse, garage, gymnasium, exhibition center, and cinema. Main Parameter 1) Steel Material: Q235, 2) thickness of material: 0.4-0.8mm 3) Feeding Width Max: 1250mm 4) Capacity of Decoiler: 5000 kg 5) Inner Diameter of the Coiler: 500-600mm 6) Outer Diameter of the Coiler: 1800mm 7) Forming steps: 20 steps 8) Driving System: Chain Transmission 9) Power of main motor: 4kw，3phases, 380V, 50Hz 10) Reducer: Cycloid Pin 11) Power of Hydraulic cutting Machine: 3kw 12) Forming Speed Max: 12m/min 13) Dimension (L*W*H) and Layout: Manual Decoiler: 1.1m*1.8m*1.2m Main Machine: 9.5m*1.85m*1.3m Runout Table: 4m*0.6m*0.8m Main Configuration SR. Main Configuration Q’ty Description 1 Manual Decoiler 1 Manual Expansion, 5T Capacity 2 Main Forming Set 1 Chain Transmission, Motor, Green 3 Cutter 1 Hydraulic, PLC Control 4 Controller 1 PLC, Encoder, Touch Screen, Transducer, 5 Hydraulic System 1 PLC control 6 Runout TAble 1 simple 7 Electric components 1 set Breaker, contactor, limit switch, Relay 8 Guard Cover 1 For the Chain, Yellow Process and Features Decoiler — Guiding —Roll Forming — Encoder —Hydraulic Cutter — run out table process of roll forming machine 1. This M/C adopts inner-expansion manual decoiler. The diameter can be adjusted through the adjusting bolt according to the coil’s inner diameter. The operation is quite easy. The decoiling speed is to the main machine’s forming speed. 2. The main frame is structured by welding entire T shape steel. The side stands are welded on the frame, and to clear the stress by vibration in order to maintain the rigidity and stability of the machine. 3. The forming rollers are made of GCr15 bearing steel through a series of heat treatment such as forging, distressing anneal, high frequency hardening(the degreed is 8-10mm), backfiring, phosphorization etc. The surface of the rollers can reach the rigidity of HRC58-62. All the forming rollers are process on CNC lathe, by which the accuracy can be granteed. 4. The main shaft is made of 40Cr advanced alloy steel after a series of heat treatment such as high frequency hardening, quenching and tempering etc and processed on lathe, burnishing the surface, wire cutting the channel to make it high accuracy and large capacity. 5. Cut to length is the last process of this machine line. It cuts accurately to any length you set on the PLC. The cutter consists of Hydraulic diver, profiled blade and cutter frame. The blade is made from Cr12 cold punching steel after strict process. It adopts 45 degree staggering cutting. This costs no waste and can hold the cutting profile a good shape. And this cutting is of high accuracy. 6. The machine adopts Mitsubishi FXIS series industrial PLC, Mitsubishi GOT-F series touch screen, Panasonic VF series Transducer and Omron encoder. The entire electric components are of good stability and long life.

Basic Company Information

China Nitchen Equipments Group Limited

Company Advantage

Detail Company Introduction