CNC lathe machine CK6150

Quick Detail

Package & Delivery Lead Time

Detailed Description

Features: CK6150 type CNC controlled lathe is used to turning inner and outer cylindrical surface, end surface, taper surface, arc surface and thread of shaft etc., with highly efficient and precision working. The tools can be fitted 8-12 position motor turret head type (or fix hydraulic turret head type by customers election). The CNC control is adopted with KND-100T 2 system and be fitted with different CNC system according to customer's requests. The spindle drive speed is adjusted by alterantion and frequency conversion, it realized permanent speed turning. The lathe adopts 45º inclined bed, with high rigidity, easy removal of chips, and convenient for observation. X and Z axes guide ways are adopted HTPM oversize with pre-loading lineal and rolling guide ways. X and Z axes leading screws are adopted bigger diameter with 2 gradation accuracy ball leading screws, the accuracy of leading screws is most high grade in domestic by made in HANJINAG screw & guide works. The screw is in center type (it is fitted in center of bed), torque was eliminated, transmissive stability was raised. The machine tool has been fitted hydraulic tank, It can be adopted ф200mm hydraulic chuck with though hole type, The lathe adopts hydraulic tailstock, The tailstock sleeve can very quick move or slow move and slight move. Therefore, It made operation and working brought much convenient and safety. The lathe is adopted whole modular cast, it is treated aging, so that cast is not deformation. The lathe is adopted wider bed, with this result supporting rigidity increase, and raise turning stability. Therefore the lathe can be strong turning. The leading screw of bed was protect with straight plate (non-folding protective shield), as a result protection water and protection of chips was raised. The machine tool guide way and screws are both lubricated periodically. The spindle supporter is adopted with pre-loading accurate and angular contact bearings (assembly by bearing works), and with double cylindrical roll bearing. It can be acquire to optimized compound with high precision, high rigidity, high load bearing ability and high turning speed. The machine tool is protected entirely closed, compact construction, occupy a small area. Specification: CK6150 Lathe working range Max. turning shaft dia.: Φ200mm Max. turning dish dia.: Φ400mm Max. turning length: 680mm Chuck clamping max. turning length: 580mm X-Axis stroke: 230mm Z-Axis stroke: 700mm Rapid transit:n X direction 8;Z direction 15 m/min Spindle Spindle nose flange: A2-5 Dia. of Spindle bore: Φ63mm Range of spindle speeds: 70-3000 r.p.m Taper of spindle bore: 1:50 Chuck max. through dia: Φ52mm Tool system Tool cross section: 25 *25mm Station No. of gang tool: 8 position turret head+ 3 station; or 6-8 station Station No. of gang tool: 8-12 Motor power Spindle motor power: 5.5KW X-axis servo motor: 1.5Kw (6N.M.) Z-axis servo motor: 1.5Kw (6N.M.) Coolant pump motor: 250W Hydraulic pressure pump motor: 1.5KW Position Accuracy Position accuracy: X direction 0.006mm,Z direction 0.008mm Repetitive position accuracy: X direction 0.003mm,Z direction 0.005mm Machining precision Roundness: 0.002mm Cylindricity: 0.005mm Main function of CNC control Least input increment:X:0.0005,Z:0.001mm Axes controlled: 2 Axes simultaneously moved: 2 Screw truing-Metric/Inch threads and taper threads: 0.01-100mm

Basic Company Information

P&G Industrial Company Limited Guilin

Company Advantage

Detail Company Introduction