Gypusm powder production line

Quick Detail

Package & Delivery Lead Time

Detailed Description

Introduction of technology: The Crusher will break the big-size gypsum ore into small 25mm pieces ,and then the small pieces will be sent to the grinder , after grinding fine ,the qualified raw gypsum powder will be sent to boiling furnace to calcine , and the unqualified part will be sent to grinder until it’s qualified .After calcining ,the qualified gypsum powder will be sent to spiral conveyor through hoist . The spiral conveyor will send the calcined gypsum powder to silo for storage ,and cool the powder during the process .The dust remover is on the top of silo , the unqualified part will be sent to grinder until it’s qualified The stored gypsum will be sent to product storage through steel impeller feeder ,spiral conveyor ,hoist , and send the qualified gypsum powder to storage or workshop finally . The top pulse bag stype dust remover will collect dust from crusher,particle silo .When the dust and dust gas get into the dust remover through inlet ,the big-size dust particle will fall because the increasing size and decreasing wind speed .The small dust particle will be filtered by filter bag .The filtered gas will be got rid of by outlet . Production Capacity: 10000tons/year ---- 200000tons/year Quality of Final Product: Conformity with Chinese National Standard GB/T 9776-1988 Raw Materials: Content of CaSO4·2H2O in gypsum mine >80%. The grade of mine and the crystal configuration will influence the quality of semi-hydrated gypsum. Fuel for Production: Natural Gas, Oil or Coal Main Parts of Equipment: 1. Ore Station 2. Crusher 3. Grinding System 4. Calcine Kiln 5. Exit System 6. Material Elevator 7. Silo 8. Entrance System 9. Coal/Natural Gas System 10. Dust Collector 11. Material Elevator 12. Aging Silo

Basic Company Information

Shijiazhuang Jinpu Hydraulic Machinery Co., Ltd

Company Advantage

Detail Company Introduction