Mixing Tank

Quick Detail

Package & Delivery Lead Time

Detailed Description

this equipment, conforming to ISO authentication, is made of 316L or 304 stainless steels. It is featured with equitable design, advanced technology, automatic control and grace appearance. The body of the pot has double-layer and insulating layer, and the surface of the inner container is polished to Ra0.25. Pearl cotton is used in the insulating layer, and the outside surface is frosted non-light. The top and the bottom of the inner pot can have ellipse seals or a convex seal can be used at the bottom of the inner pot. The whole pot body is very smooth without any sanitary dead space. It can be designed and produced according to customers' demand. The internal of the DM WATER TANK will be grinded to very smooth finish. Care is taken such that there are no dead pockets where any emergence of microbacteria growth is there. All the joints are finished very finely and internal is buffed to a very fine finish. Optionally internal of the vessel can be electropolished Special care is taken for the bottom discharge valve such that every drop is drained out and there is no retention. Electropolished pipeline is provided . The pipeline is given as under From the outlet of the vessel to the pump From pump to bypass drain line From pump to the filter housings From filter housing to the circulation pipeline and From filter housing to recirculation into the tank again. The necessary valves will be provided.

Basic Company Information

China Hangzhou Kehao Machinery Co., Ltd

Company Advantage

Detail Company Introduction