Unpredictable current of the biomass pellet making device

The ring die  as well as the pressing roller of the biomass pellet making  maker rotate at a  consistent  rate, and the working state of each  immediate is  primarily the same. If the  quantity of feed material is  unmodified, the  power consumption  must  additionally be  fairly  secure,  as well as the current will be reflected on the  electric motor.  Likewise relatively  steady.

Related post: biomass pellet making machine

When the biomass pellet making  device  device is  functioning, we adjust the feeding  quantity as long as the material thickness in the feeding area is less than the  optimum  beginning point of the pressing  location, it will  straight affect the length of the effective  workplace of  journalism  location and the pressing  location,  as well as  create the current to flow.

The fluctuation  and also the change of the  per hour  outcome of the biomass pellet making  equipment, and if the thickness of the  product layer in the feeding  location is  above the  optimum  beginning  factor of  journalism area, in addition to increasing the thickness of the  product layer in the feeding  location, it  will certainly not  impact the  per hour  outcome  and also  power  usage  each time.

Related post: biomass pellet plant

If there is any impact, it will  no more  trigger  modifications in  existing  and also biomass pellet making  device  result.  Since the  density of the  product layer in the feeding zone exceeds the maximum  beginning  factor of the pressing zone, the  period between the pressing  area and the pressing  area is constant without any  modification. In the interval where the multi-feed  product  lies, the clamping angle is greater than the  essential friction angle,  as well as the material  will certainly not be squeezed into  journalism area.

In this way, with the increase of the feeding  quantity of the biomass pellet making machine, the  equilibrium of in and out is  damaged,  as well as the in is  above the out,  and also the  product layer in the feeding area is It  will certainly accumulate thicker  and also thicker until all the  spaces are  filled up  as well as  obstructed to the feed port,  to make sure that the biomass pellet  equipment can not  function  generally.  Right now, the current  will certainly  boost.

Related post: 10T/H Biomass Wood Pellet Plant in USA 

In the actual work of the biomass pellet making  equipment, with the adjustment of the feeding amount, the  immediate  result and the current of the  major motor will  transform  as necessary.  And also when the feeding thickness does not  surpass the maximum starting  factor of the pressing  location, it  will certainly not  trigger  a growing number of  worldly layers in the feeding area  because of the increase in the amount of powder we feed.

As has been  stated before, the area that can  create  rapid  outcome  as well as  power  intake changes  must be  both  locations of  job  as well as material layers - the compression area  and also the biomass pellet  equipment extrusion area, so we think that the  3rd  location  discussed above- - The reasonable  presence of the feeding  location has  particular conditions.

That is to  claim, the fed material layer is distributed in the compaction area, the extrusion  location  as well as the feeding  location whose  complete thickness does not  go beyond the maximum  entrance point of the compaction area.

Related post: RICHI pellet making machine

The biomass pellet making  equipment  will certainly work normally under the allowable power. If the  quantity is  also  huge  and also  goes beyond the  density of the maximum starting  factor of the compaction area, the material layer  will certainly  gather  as well as  progressively  rise, and the biomass pellet making  maker will not work normally. Current is  changing.

 With the above  evaluation, let's discuss some  sensations  displayed by the biomass pellet making  equipment under  2 possible working  problems:

( 1 )When the power of the main motor is not large enough  compared to the corresponding biomass pellet making machine granulation  criteria, the  density of our feed is at the end of the extrusion zone  as well as the  optimum entry point of the compression  area (this will vary with the raw  products, compression  proportion,  reliable length-diameter  proportion,  moisture, pressure rollers  as well as  various other variable  elements to  readjust accordingly),  normally will not  surpass the  optimum starting  factor, with the increase of the feeding  quantity, the compression  location  will certainly  alter  appropriately.

The length of the  period  will certainly be shortened, and the interval  size of the  capture  location will  progressively  boost  as necessary, and the current of the  major motor  will certainly  likewise  slowly increase until it reaches the maximum  allowed  usage. If the  present  gets to the  security  worth we set,  and also the thickness of the feeding  product  has actually not  gone beyond the  density of the maximum starting point of the biomass pellet  device pressing  location, if the feeding  quantity is  raised, the safety system will act,  and also the excess powder  will certainly be discharged. In order to  make sure the  regular  feature of biomass pellets.

Related post: https://www.pellet-richi.com/wood-pellet-machine/biomass-pellet-mill.html

( 2 ) Expect the power of the  major  electric motor is  huge or the motor fails to overload after the thickness of the feeding material  goes beyond the thickness of the  optimum starting  factor of  journalism area  because of the  thorough  adjustments of  numerous variables. At this time, the powder fed to  individuals can not increase the time  outcome,  neither will it cause the  rise of the  primary motor  present,  however can only  remain to increase the powder  heap  built up in the machine  up until the  internal  tooth cavity of the biomass pellet press  equipment is  obstructed.

 Create the biomass pellet making  equipment to not work properly.  Naturally, this special phenomenon  seldom  happens in actual production (if the raw material moisture is too large, the effective aspect  proportion is  also small, the  stress roller is  drastically  put on and the  space is not adjusted  appropriately, the raw  product is replaced,  and so on, this phenomenon may  take place), this is our undesired  problems.

In-depth analysis of the first commonly used  functioning state, it is  uncomplicated to  understand that on the premise that the relevant  problems are  unmodified, with the  adjustment of the feeding  quantity, the interval  size of the compression zone  and also the extrusion  area is within a  specific range  Matching changes are  additionally made (the feed flow  price is reduced, the  size of the extrusion zone is  decreased,  as well as the  size of the compression zone is  extended; otherwise, the extrusion  area is  expanded and the compression zone is  reduced), and the feeding  quantity does not  surpass the  stress. When the  density of the  optimum starting  factor of the tight area is concerned, the lengths of the above two intervals are not a constant value when this article is written. The larger the extrusion zone length value, the higher the biomass pellet maker production efficiency and the longer the pellet length per extrusion per roller.

Therefore, it is concluded that the factors of current instability under the condition of controlling the feeding amount need to be investigated from the moisture content of the raw material, the effective aspect ratio is too small, the pressure roller is severely worn and the gap is not adjusted properly, and the raw materials are replaced.

RICHI MACHINERY has been established for more than 25 years, specializing in biomass pellet making machine for sale, the development and production of single/complete pellet production lines such as animal feed, biomass fuel, wood waste, grass, straw, organic fertilizer, etc, and provide design and services for EPC/Turnkey projects!