FAQ from consumers that purchase timber pelletizer maker

( 1) How to make the  mold and mildew life  much longer?

With the  continual introduction of  timber pelletizer machine into  the marketplace, the  growth of mechanical tools is  likewise constantly  altering. The wear and tear of the  mold and mildew during the production of wood pellets is  additionally a  significant cost. So,  exactly how to maintain it  straight  influences the service life of the  timber pellet making machine.  For that reason, it  additionally  straight  influences the  handling cost of  timber pellets.  Just how to make the mold life of the wood pelletizer  equipment machine longer?  Obtain your answer today!

Related post: wood pelletizer machine

①  Routinely clean oil  as well as fill

If the  timber pelletizer  device is not used for a month, it is  suggested to  clean up the oil inside, so the oil will  progressively  solidify  throughout long-term  storage space, which will make it  challenging to  eliminate the next time it is  utilized, which will seriously affect the subsequent use of the  mold and mildew of wood pelletizer  maker.

 After the pellets are processed, it is necessary to  utilize oil to grind for a  amount of time to  make sure that all the oil  stays in the die hole, which is of great benefit to the  job the next day and is  likewise conducive to the long-term use of the die. The oil can be  combined with waste engine oil  as well as  timber chips. It can be made  when and can be recycled.

Related post: wood pellet plants

② No need to  clean up the mold for a long time

If the  mold and mildew  as well as pinch rollers are no longer  utilized for a  very long time, it is  advised to  get rid of the  mold and mildew after cleaning and storage. The master  cleanses the sawdust pellets inside the mould  as well as adheres to the mould  surface area.  This way, on the one hand, we can  stop the enterprise from being  challenging to  get rid of the pellets due to the  solidifying of the pellets  as a result of the  long-lasting storage of the  trainees. On the other hand,  since the sawdust has water absorption, if the sawdust on the surface is not removed, it  might  increase the development of the  deterioration of the mold  surface area.

③ The mold  need to be  saved in a dry  and also ventilated  area

 The majority of the  mold and mildews of the  timber pelletizer  device are  constructed from alloy steel. If they are in a humid  area for a  very long time, the  surface area of the mold  might be  harmed  as a result of air  deterioration, thus  significantly reducing its service life.

Related post: Germany 2-2.5T/H Wood Pellet Plant

④ The handling  procedure  ought to be careful

The mold of the wood pelletizer  device is a high-precision  component,  as well as the  mold and mildew hole is carefully  refined according to the compression ratio of the  mold and mildew. If you are careless  throughout the  managing  procedure, the  framework of the inner wall of the mold  opening is damaged, which  might lead to molding  throughout  handling. low rate  and also short service life.

The above are the  ideas on how to make the  mold and mildew life  much longer for  timber pelletizer  equipment Follow these  5  techniques to maintain the mold,  and also I believe your mold  will certainly last longer.

( 2) Why do the pellets  generated by the  timber pellets machine have a  negative  look?

Why do the pellets  generated by the  timber pellet mill  maker look  poor? Today we will  learn why. During the  manufacturing of  timber pellet fuel by the wood pellet production  maker, there will be a situation where the pellets  have powder  as well as have a rough  surface area.  Currently, it is also necessary to  inspect the  devices data  setups of the  timber pelletizer  equipment. Besides, what is the reason for this  sensation?

Related post: RICHI pelletizer machine

 Timber pellets  trigger  even more wood pellet powders, this feedstock can be  triggered by low  dampness  web content, the  wetness content of  timber pellet machine feed is  generally between 12% and ~ 15%. After adjusting the moisture content of the raw material, the problem still exists, that is, the  stress roller die is seriously worn. When the inner  surface area of the ring die of the wood pelletizer  equipment is  seriously  used or the  bit diameter needs to be changed, it needs to be  changed. The surface of the sawdust pellets is rough, which may be  brought on by the excessive moisture content of the raw material, or the  first  use the  mold and mildew. This  trouble can be solved by  changing the  wetness  material of the raw material, or by  consistently grinding the mold with the material.

To sum up, the  reasons that the pellets  created by the  timber pelletizing machine are  bad in  look are mentioned today. I hope it will  aid you when you  make use of the  timber pellet  device  once again.  Throughout the years, Richi Machinery has  concentrated on the research and development  as well as production of wood pelletizer  equipment machines, biomass pellet  equipments, sawdust pellet  equipments,  gas pellet  devices,  timber  handling  tools,  drying out equipment,  cooling down equipment  as well as packaging  devices.

( 3) Recommended  timber pellet  maker.

There are many  timber pellet mill machine on  the marketplace. Today, Richi  Equipment  will certainly  suggest some of them:

① The first type of  tiny  timber pelletizer  equipment

It is a  brand-new  sort of biomass  power machinery  separately  created by our company's technical  personnel  as well as has independent  copyright  legal rights. The wood pelletizer  maker is  easy in structure,  simple to  run, stable in operation,  and also can  function  continually. The pressed pellets have the advantages of high density, high combustion  worth,  reduced  dampness  as well as low ash content. The  timber pellet  equipment  maker  transmission  embraces high-precision  equipment transmission, four  collections of gears are connected, and the hydraulic oil  shipment system can  immediately  distribute oil between the gearbox  and also the  primary shaft bearing. The service life of the  primary shaft  as well as gearbox gears.

Related post: https://www.pellet-richi.com/wood-pellet-machine/wood-pellet-mill.html

The working parts of the wood pelletizer  device die plate, pressure roller) are  made from alloy steel,  and also the  firmness after  warmth  therapy can reach more than 50, which  guarantees the  constant  procedure of the  device and  extends the  life span of the whole wood pelletizer  maker The  digital control system of the  primary engine  embraces the  global  typical  arrangement of star-delta starting, and the operation is  exceptionally stable.

② The  2nd  sort of  tiny wood pelletizer  maker.

Mainly  appropriate for granulation of crude fibers, such as corn stalks, sawdust, rice husks, cotton stalks, cottonseed husks, weeds  as well as  various other  plant stalks  as well as  manufacturing facility wastes. It is suitable for  reduced temperature granulation of biological bacterial  plant food,  natural fertilizer and  substance fertilizer.

Features of this wood pelletizer  device:

① The  stress rollers are  equally distributed,  and also the operation is  steady. At the same time, the pressing  location is  boosted, and the production efficiency is  boosted.

② The screw center pressure regulating  framework is adopted,  as well as the wood pelletizer  equipment  mold and mildew gap can be large or small, which  appropriates for  various  products to  guarantee the pressing effect.

③ This  design is equipped with Φ6-Φ10mm diameter  mold and mildews, which  appropriate for granulation of different  products  as well as  attain  the most effective benefit.

For details please contact: Richi Machinery 

WhatsApp：86 138 3838 9622

Email：enquiry@pellet-richi.com