Great marketing in Indonesia totally wood biomass pellet production line price

The rate of the biomass pellet production line is determined by the  resources  made use of.  For instance, if the raw materials are branches  as well as trunks with high  wetness content, they  ought to be  damaged - crushed - dried - granulated - packed -  delivered. It mainly depends on what  basic materials are  utilized. 350 type biomass pellet  maker  devices 38,000,  version: 350 type 300 ~ 500 kg per hour, 450 type 500 ~ 800 kg, 560  kind 1 ~ 1.5  bunches, 600 type 2  loads, 850 type 3 ~ 4 tons.

The  excellent  marketing in Indonesia biomass pellet production line price relies on your raw materials  and also output  dimension. First of all, you need to  recognize what your raw materials are. The raw materials are  prefabricated sawdust or  timber chips and the moisture  material of the  products is 10%-15%. A factory  supplied  brand-new technology wood pellet  maker  suffices. If your  basic materials are  unrefined logs, branches, etc  require to be pulverized by a  timber chipper  as well as biomass crusher, then  dried out in a  clothes dryer (if the moisture  surpasses 15%, it  requires to be  dried out),  after that the  major machine is granulated, and then the packaging machine  loads this  collection of production lines.

 Understanding your  resources  has to do with the  outcome. The output of the RICHI biomass pellet mill  maker is  various  as well as the model is different, so the  rate is also  various. The biomass pellet  assembly line  rate is not  just a  issue of reporting a number, but it is necessary to formulate a plan  and also quotation according to your requirements.

 First off, the raw material moisture requirements of  timber pellets are  really  stringent. The  wetness content of the  product is  too expensive, which blocks the die  openings,  to ensure that the particles can not be produced; if the  wetness content of the  product is  as well  reduced, if it is  also  completely dry, it is not easy to form, and the  thickness is not enough.

Related case: 5T/H biomass wood pellet factory in Austria

 Normally 12%-13%, 15-20% of the raw material  dampness after  inflection is the standard for  pushing  timber pellets. If the raw  product moisture is  too expensive, the mold resistance and  sliding phenomenon will  take place after the raw material enters the biomass pelletizer ring  pass away;  take note of control the  dampness  material of the raw material before entering the biomass pelleting  equipment, If the water  web content is  expensive, there  will certainly be slippage in the ring die, resulting in the phenomenon that it is  challenging to discharge.

If your  basic material  wetness satisfies the  demands, a biomass  timber pellet press machine can produce wood pellets. If it does not  satisfy the  demands, it needs to be  dried out, so it  requires to be  furnished with a wood dryer and a hot blast  oven.  Naturally this is if your  resources is  timber chips. If your raw material is wood chips (thickness less than 0.5 mm), it needs to be pulverized, which is equivalent to adding  an additional process. Some customers'  basic materials are bark, which is  additionally  feasible after  including a wood pulverizer.

More details: https://www.pellet-richi.com/wood-pellet-machine/biomass-pellet-production-line.html

However, some  clients' raw materials are  timber scraps,  since the  cost of  timber scraps is cheap  as well as  very easy to  purchase, so there are  several cases, then it is  essential to add a  timber chipper,  initially to cut the non-standard  timber scraps  right into wood chips,  and after that  most likely to  squash.

For some  consumers whose  basic materials are waste  structure templates, it is  needed to  transform the  timber chipper to a bamboo plywood crusher.

Because the bamboo plywood itself has  numerous iron nails, it is  really  simple to  harm the knife on the  timber chipper when  making use of a wood chipper. Another reason is that the waste  structure  theme is  reasonably wide,  and also the feed port of the  timber chipper is  normally 1250px.

It is  difficult to manually  damage it in advance, right? The bamboo plywood crusher can  go into  any kind of bamboo plywood with a feed opening of less than 1.25 m,  and also the gnawing  blade of the bamboo plywood crusher is an ingot knife,  as well as the iron nails have little effect on him.

Unlike wood chippers, the blades are  quickly  harmed. Bamboo plywood is  additionally an  benefit of making wood pellets.  Normally, its  dampness  web content is very  little,  in between 15-20%.  For that reason,  making use of bamboo plywood as pellets  conserves the trouble of  timber drying machines.