On-table model
The instrument can place on the experiment table, or Pilotech inert loop system YC-501, featuring small size and convenient operation;
Laboratory spray dryer Model yc-500 has the basic type and the organic solvent type YC-501 (with inert loop system). YC-500 laboratory spray dryer is for aqueous solution, which can simply be updated to organic solvent type after equipped with YC-501 inert loop system;
During experiments, the new spray atomizer would never be off-center in atomization, and there won’t be affected recovery rate by spraying on the bottle wall. The spray atomizer can change the spray site to improve the spray effect by moving up and down; notably, the spray atomizer has excellent adaptability to material with high viscosity and few blocking situation;
Laboratory spray dryer yc-500 standard tail gas dedusting equipment can reduce environmental pollution while effectively improving the yield, especially the yield of difficult recycle;
PLC automatic control,One-click boot.
Color Touch Screen,Fast setup and cleaning times
Scale up to pilot or industrial scale possible.
Visible process due to glass assembly
Adjustable particle size (1 – 25 microns)
The stainless steel spray assembly consists of an inner tube for the liquid sample leading to a small diameter jet. An outer tube directs compressed air to the nozzle. All units with 0.7mm jets, other sizes are available as accessories.The spray assembly incorporates an automatic de-blocking device that prevents the jet nozzle from becoming blocked, the de-blocking needle activating by an integral compressor. De-blocking is sometimes necessary with materials which may solidify or when large particles in suspension cause blockages in the jet.
Over 1,500 customers of top universities, enterprises and research institutes use our mini spray dryer. And exported to more than 40 countries & regions such as the United States, Italy, South Korea, Mexico,Singapore, Canada, Malaysia, Chile and Russia.
Laboratory spray dryer(Model YC-5000 using in a wide range of applications.This technique has successfully processed materials in the following areas: