10HP 50/60HZ three phase 220 v to 380 v inverter frequency inverter, converter, vsd
0 likes
China [CN] 10HP 50/60HZ three phase 220 v to 380 v inverter frequency inverter, converter, vsd
MH300 high end series, owns two control models: open-loop&closed-loop vector control with high performance and best price that can drive asynchronous motor and synchronous PMSM ac motor(MH300P series).
| MH300 Series Technical Datasheet | |
| Basic Function | |
| Max Frequency | V/F control: 0-3200Hz, vector control:1:300Hz |
| Carrier Frequency | 0.5Khz-16Khz, automatically adjust per load characteristics |
| Input Frequency Resolution | digital setting: 0.01Hz; analog setting: Max frequency x0.025% |
| Control Mode | VFD, SVC, FVC |
| Starting Torque | 0Hz/180%(FVC), 0.5Hz/150%(SVC), 0.5Hz/100%(V/F) |
| Speed Range | 1:1000(FVC), 1:200(SVC), 1:50(V/F) |
| Steady Speed Precision | ±0.02%(FVC) |
| Torque Control Precision | ±5%(FVC) |
| Overload | 150% rate current 60s; 180% rated current 3s. |
| Torque Increase | Automati torque enhancement; Manual torque improvement0.1%-30.0% |
| V/F Curve | three way: linear; multipoint; N-power V/F curve(1.2-power, 1.4-power, 1.6-power, 1.8-power, 2-power) |
| V/F Separate | 2 way: full separation, semi-detached |
| Acceleration Deceleration Curve | linear or S-curve plus deceleration. Four acceleration and the range deceleration times 0.0-6500.0s |
| DC Brake |
DC brake frequency: 0.00Hz-Max frequency Brake time: 0.0s-36.0s Braking action current value:0.0%-100.0% |
| Inching Control |
Inching frequency range: 0.00Hz-Max frequency Inching deceleration time: 0.0s-6500.0s |
| Simple PLC, Multistage Running | Through built-in PLC or control terminal to realize Max 16 speed running |
| Bulti-in PID | To realize the process control closed-loop control system |
| Automatic Voltage Regulation(AVR) | When the grid voltage changes, to keep output constant voltage |
| Overpressure Loss Rate Control | Automatic limit of current voltage during operation to prevent overcurrent overvoltage to stop |
| Fast Current Limiting Funication | Maximum reduce overcurrent failure to protect the frequency converter normal run |
| Torque Limitation and Control | Feature of excavator, automatic limiation of torque during operation to prevent frequency overcurrent to stop; Closed-loop vector mode can realize torque control. |
| Personalization Feature | |
| Outstanding Performance | With high performance current vector control technical to realize and control asynchronous and synchronous motor |
| Instantaneous Stop Constantly | In the instantaneous power fail, through load to feedback energy to make up the voltage reduce, to maintance frequency converter to keep running in a short time |
| Rapid Current Limiting | To avoid frequency converter frequent appear overcurrent fault. |
| Virtual I/O | Five groups of virtual DIDO to realize simple logic control |
| Timing Control | Timing control funication: setting range time 0.0Min-6500.0Min |
| Multimotor Switching | Four group motor parameters, can realize four motor to switch control. |
| Motor Overheat Protection | Select IO expansion card 1, analog input A13 can accept motor temperature sensor input(PI100, PI1000) |
| Running | |
| Input Terminal |
Standard: 5 digital input terminals One of them support Max 100Khz high speed pluse input, 2 pcs analog input terminal, 1 only support 0-10V voltage input, 1 support 0-10V voltage input or 4-20mA current input
Extension Ability: 5 digital input terminal 1 analog input terminal, support -10V∼10V voltage input, and support PI100/PI1000 |
| Output Terminal |
Standard: 1 high speed pluse output terminals(can optional to be open collector type), support 0-100Khz square wave signal output 1 digital output terminal 1 relay output terminal 1 analog output terminal, support 0-20mA current output or 0-10V voltage output
Extension Ability: 1 digital output terminal 1 relay output terminal 1 analog output terminal, support 0-20mA current output or 0-10V voltage output |
| Command Source | Operation panel given, control terminal, serial port given. It can switch by my ways. |
| Frequency Source | 10 frequency source: digital given, analog current given, pluse given, serial port given. It can switch by many ways. |
| Auxiliary Frequency Source | 10 kinds auxiliary frequency source. Flexible to realize auxiliary frequency fine turning, frequency synthesls. |
| Display and Keyboard | |
| LED display | Display parameters |
| LCD display | Optional part, chinese or english operation content |
| Keyboard locking and funication selection | Realize part of key or all to lock, or define the scope part of key, to prevent the wrong operation |
| Protection Function | Power on motor short circcuit detection, input output loss phase protection, overcurrent protection, overvoltage protection, under-voltage protection, overheat protection, overload protection, etc., |
| Environment | |
| Using place | Indoor, not exposed to direct sunlight, dust, corrosive gas, flammable gas, oil, fog, water vapor, water or salt |
| Altitude | |
| Environment Temperature | -10℃～+40℃(environment temperature in 40℃～50℃, please derating use |
| Humidity | ＜95% RH, no water condense |
| Vibration | ＜5.9m/s²(0.6g) |
| Store Humidity | -20℃～+60℃ |
Rich Extensibility&Terminals: there are different extended cards for I/O point, CAN, Profibus and PLC. And various PG cards are provided for closed loop vector control.
Product Components and Independent air fule: strong anti-interference power mainboard; infineon IGBT module with strong overload capability; indepent air fule prevents dustry entering and decreases temperature rise.
Drive asynchronous motor and PMSM synchronous motor without encoder(MH300 series with self-tunning function ) with high rotating speed and wide speed range: SVC is with ±0.5% rotating speed, 1:100 speed range, <20ms torque response; FVC is with ±0.2%, 1:1000 and <2ms.
Instant stop Non-stop Function&Overexcitation Braking Function: When instantly powers off or accidently voltage drops, frequency converter will low output speed and feedback power through load to guaranteen itself run in short times. Overexcitation braking function can effectively inhibit Bus voltage increasing to avoid frequent fault alarms, and realize fast braking.
Excelent Side Wave&Multi Motors to Switch: MH300 series owns excelent side ware to meet one-driven-multi and long distance application. It supports four motors' parameter that realize the switch asynchronous motor and synchronous PMSM AC motor.
Bulit-in Simple PLC to realize cycle operation at Max 16-segment constant time and speed.
Pendulum Frequency Function &Vitual I/O: pendulum frequency function can improve colling's densityin textile and chemical fiber manufacturing industry; Through easy setting, inner logic control function can be customized.
♥ The avaliable voltage specifications are: 3 phase 380vac input output, 3phase 220vac input output, 1phase 220vac input 3phase 220vac output.
♥ Frequency converter can not be used as voltage inverter or converter. But its input voltage can be DC(±15% DC540V for 3phase 380V devices, ±15% DC310V for 3phase 220vac devices).
| Model | Power Capacity /KVA | Input Current /A | Output Current /A | Adaptive Motor | |
| KW | HP | ||||
| Single phase Power: 220VAC, 50/60Hz | |||||
| MH300G2S0.4GS | 1.0 | 5.4 | 2.3 | 0.4 | 0.5 |
| MH300G2S0.75GS | 1.5 | 8.2 | 4.0 | 0.75 | 1 |
| MH300G2S1.5GS | 3.0 | 14.0 | 7.0 | 1.5 | 2 |
| MH300G2S2.2GS | 4.0 | 23.0 | 9.6 | 2.2 | 3 |
| Three phase Power: 280VAC, 50/60Hz | |||||
| MH300G4T0.4GS | 1.0 | 0.4 | 0.5 | ||
| MH300G4T0.75GS | 1.5 | 3.4 | 2.1 | 0.75 | 1 |
| MH300G4T1.5GS | 3.0 | 5.0 | 3.8 | 1.5 | 2 |
| MH300G4T2.2GS | 4.0 | 5.8 | 5.1 | 2.2 | 3 |
| MH300G4T3.7GS | 5.9 | 10.5 | 9.0 | 3.7 | 5 |
| MH300G4T5.5GS | 8.9 | 14.6 | 13.0 | 5.5 | 7.5 |
| MH300G4T7.5GS | 11.0 | 20.5 | 17.0 | 7.5 | 10 |
| MH300G4T11GS | 17.0 | 26.0 | 25.0 | 11 | 15 |
| MH300G4T15GS | 21.0 | 35.0 | 32.0 | 15 | 20 |
| MH300G4T18.5GS | 24.0 | 38.5 | 37.0 | 18.5 | 25 |
| MH300G4T22GS | 30.0 | 46.5 | 45.0 | 22 | 30 |
| MH300G4T30GS | 40.0 | 62.0 | 60.0 | 30 | 40 |
| MH300G4T37GS | 57.0 | 76.0 | 75.0 | 37 | 50 |
| MH300G4T45GS | 69.0 | 92.0 | 91.0 | 45 | 60 |
| MH300G4T55GS | 85.0 | 113.0 | 112.0 | 55 | 70 |
| MH300G4T75GS | 114.0 | 157.0 | 150.0 | 75 | 100 |
| MH300G4T90GS | 134.0 | 180.0 | 176.0 | 90 | 125 |
| MH300G4T11GS | 160.0 | 214.0 | 210.0 | 110 | 150 |
| MH300G4T132GS | 192.0 | 256.0 | 253.0 | 135 | 175 |
| MH300G4T160GS | 231.0 | 307.0 | 304.0 | 160 | 210 |
| MH300G4T200GS | 250.0 | 385.0 | 377.0 | 200 | 260 |
| MH300G4T220GS | 280.0 | 430.0 | 426.0 | 220 | 300 |
| MH300G4T250GS | 355.0 | 468.0 | 565.0 | 250 | 370 |
| MH300G4T280GS | 396.0 | 525.0 | 520.0 | 280 | 420 |
| MH300G4T315GS | 445.0 | 590.0 | 585.0 | 315 | 470 |
| MH300G4T355GS | 500.0 | 665.0 | 650.0 | 355 | 530 |
| MH300G4T400GS | 565.0 | 785.0 | 725.0 | 400 | 600 |
| MH300G4T450GS | 630.0 | 883.0 | 820.0 | 450 | |
1. More than 15 Years' Experiece in PLC: MOCHUAN, as an integrated industrial automation products supplies, owns mature business business chain: R&D team, qualified production equipments, long-term international logistics cooperators, experienced pre-sale&after-sale engineer team to solve any problem in operating switch sensor, PLC, HMI, VFD and PMSM ac motor.
2. Experienced Engineering Team: besides trade company, Mochuan also is an engineering company. Every our engineer is with experienced practices in electric scheme, electric programming.
3. Realizable Quality: Every product is finished by the strict quality test system and checked by the professional engineer before delivery to ensure customers' benefit.
4. First-class Pre and After Service: professional pre-sale service to confirm each technical request and fully guarantee right product model to save time and money for you.
CE CERTIFICATES:
With four-year developing with each customer's great and kind cooperation each time, Mochuan Drives's foreign business and market has been blooming and thriving, epecially in India, Russia, United States, Canada, United Kingdom, Austrilia, etc.,
Q1. How to install frequency converter?
11KW or less, horizontal distance should be 4cm; Vertical distance should be 10cm.
15KW and more ,horizontal distance should be 15cm; Vertical distance should be 35cm.
Q2. How to correct connection of frequency converter?
There are Single phase and 3phase, inculding power and motor terminal. More information please click below link to know more, thank you !
Q3. Under wrong parameter settings or after finish to setting parameter but can not running?
Under standby condition, Please restore the factory values. Parameters P50.20 change to be 22 then press confirm.
Q4. What information should provide, if want to get a quotation?
You could tell us your requirements and usage or our models
Q5. Can be applied in the heavy load and high precision equipment of frequency converter?
Mochuan MH200is suitable use for falt load control. And MH300 vector frequency converter series, mature application in the metal wirte drawing and plastic extrusion machine, Widely used in high precision machining center motorized spindle and printing equipment.
Click enlarge Image