28 transistor input output DC24V programmable cheap mini hmi plc rs232
MU2V | MU2H | MU1H | |
I/O Point | 16/16, 28/28 | 16/16, 32/32 | 08/06, 12/08, 16/14, 24/16, 36/24 |
Max Logical I/O | 512 | 512 | 256 |
Max Special Function Module | 8 | 8 | 2 |
Program Capacity | 32K | 24K | 12K |
Pulse Output |
8*200KHZ (support 4 differential output) |
3*100KHZ (transistor output) |
2*100Khz ( transistor output) |
One-phase Counting Channel |
8*200Khz (support 4 differetial input) |
2*50HZ 4*10Khz |
2*50Khz 4*10Khz |
Tow-phase Counting Channel | 4*200Khz | 1*25Khz, 2*5Khz | 1*20Khz, 2*10Khz |
Sum of Counter Frequency | 800Khz | 100Khz | 80Khz |
PLC N:N | support | ||
RTC | support(power down keeping at least 3years) | ||
Constant Scanning Mode | support | ||
Digital Filter | 0.8, 1.6, 3.2, 6.4, 12.8, 25.6, 51.2, adjustable | ||
Feature | Description | ||
Programming Software | Free MCprogrammer | ||
Program Security | donwload/upload/program/password | ||
Programming language | ladder, instruction, SFC | ||
Communication Protocol | programming protocol, Modbus, CAN, and free port, MXlink | ||
Expansion Module | I/O extension module,AD/DC, thermal resistance, thermal couple, pulse, weighting, etc |
Item | MU2V-1616MT | MU2V-1616MT1 | MU2V-2828MT | MU2V-2828MT-CAN | |
Running Mode | scan round/interruput | ||||
Instruction | basic instruction | 31 | |||
step instruction | 2 | ||||
applied instruction | 264 | ||||
Program Capacity | 32K steps | ||||
Programming Cable | mochuan | ||||
Pulse Output | 8*200Khz(transistor output), support 4channel differential output | ||||
Power Supply Output | 24VDC | ||||
Input/Output Specification | |||||
I/O Point | 16/16 | 28/28 | |||
Expanded I/O Points | 512 | ||||
Working Volt | A85~264V/DC24V | ||||
Output Type | transistor | ||||
Insulation Method | mechanistic | ||||
Max Load | |||||
ON/OFF Response Time | Y0~Y1<5μs/10mA, the other<0.5μs/100mA | ||||
Register Specification | |||||
Timer | 100ms | T0~T209(0.1~3276.7s) | |||
10ms | T210~T251(0.01~327.67s) | ||||
1ms | T252~T255(0.001~32.767s) | ||||
Counter | 16bit | 16bit increase: 0~199 | |||
32bit | 32bit increase & descrease: 200~C234 | ||||
High-speed Counter | single phase single counting input(32bit) | C235~245 | |||
single phase two counting input(32bit) | C248~C250 | ||||
two phase two counting input(32bit) | C251~C255 | ||||
Data Register | D0~D32767 | ||||
Part Data Register | V0~V63 | ||||
Indexed Register | Z0~Z63 | ||||
Specifical Data Register | SD0~SM511 | ||||
State Register | S0~S11023 | ||||
Interrupt Sepcification | |||||
Internal Timer Interrupt | 3 | ||||
External Interrupt | 16 | ||||
High-Speed Counter Interrupt | 8 | ||||
High-Speed Counter Interrupt | 12 | ||||
POT Output Finished Interrupt | 8 | ||||
Power Off Interrupt | 1 | ||||
Communication Specification | |||||
Communication Port | PORT0: RS232; PORT1:RS485; Extended RS232/485/CAN/Ethrent | ||||
Security Specification | |||||
Basic | project file/program/upload/download/monitor | ||||
High-Level | forbidded formatting/forbidden upload/number limit of password retries | ||||
Dimensions | |||||
Size(L*W*H)mm | 158*90*83 | 226*90*83 |
Super Extension System: max expansion to 512 points and 8 special function module which could meet multi environments project needs.
Multi Axis Control: MU2V series PLC controller programmable logic controller support totally 8x200kHz pulse input and output without the other any the other separate extended I/O module and special function module.
Integrates PID function:MU2V series main module integrates temperature control function, matched with MU2H series TC, PT module, Max 32 road TPID could not made supporting the self-determming function of TPID parameter.
Reliable Security:
1. all main program and subprogram can be separately encrypted to prevent proporietaty-technology reveal;
2.limit the numbers of password retires to avoid inllegal decrytption;
3. program upload/download/monitor can be set different password;
4. supply forbidden formatting and uploading;
5. support downloading compiling file without user program, which is for batch production and on-site maintenance;
6. User assign PLC serial number, only could run in correspondent PLC.
MCProgrammer meet IEC61131-3 internation standardv
Three Programming Language: ladder, instruction list, SFC which could be interconverted. As for convertion between ladder and instruction list, annotion could be kept.
Visual Panel and Oscilliscope: visual panel makes monitoring onlineDemo more vivid; oscilliscope makes fault easier found in debugging process.
I/O Extended Module | ||||||
Model | I/O Points | Digtial Input | Dgital Output |
Size(mm) L*W*H |
||
Input Points | Type | Output Point | Type | |||
MU2H-0800ENN | 8 | 8 | leak/source | - | - | 58*90*83 |
MU2H-0808ERN | 16 | 8 | leak/source | 8 | relay | |
MU2H-0808ETN | 16 | 8 | leak/source | 8 | transistor | |
MU2H-1600ENN | 16 | 16 | leak/source | - | - | |
MU2H-0016ERN | 16 | - | - | 16 | relay | |
MU2H-0016ETN | 16 | - | - | 16 | transistor | |
MU2H-1616ER | 32 | 16 | leak/source | 16 | relay | 158*90*83 |
MU2H-1616ET | 32 | 16 | leak/source | 16 | transistor | |
MU2H-1616ERN | 32 | 16 | leak/source | 16 | relay | |
MU2H-1616ETN | 32 | 16 | leak/source | 16 | transistor |
Specification Function Module | |||||
Model | Input | Output |
Size(mm) L*W*H |
||
Input Points | Type | Output Points | Type | ||
MU2H-2AD | 2 | voltage,current | - | 58*90*83 | |
MU2H-4AD | 4 | voltage,current | - | ||
MU2H-2DA | - | 2 | voltage,current | ||
MU2H-4DA | - | 4 | voltage,current | ||
MU2H-2PT | 2 | thermal resistance | - | - | |
MU2H-4PT | 4 | thermal resistance | - | - | |
MU2H-2TC | 2 | thermal couple | - | - | |
MU2H-4TC | 4 | thermal couple | - | - | |
MU2H-8TC | 8 | thermal couple | - | - | |
MU2H-2PG | - | 2 | pulse | ||
MU2H-2HC | 2 | pulse | - | - | |
MU2H-4ADH | 4 | high precision voltage,current | - | - | |
MU2H-4WT | 4 | weighting sensor | - | - |
Extended Card | |
Model | specification |
MU2H-CAN-BD |
support CAN2.0/ CAN2.0B hardware port(isloated) support free port, protocol, MXLink protocol |
MU2H-RS485-BD | support RS485 hardware port |
MU2H-CAN-RS232-BD | support CAN2.0A/2.0B, RS232 hardware port |
MU2H-RS232-BD | support RS232 hardware port |
MU2H-ETH-BD |
10/100M adapt support TCP/IP protocol programming port protocol Modbus TCP protocol(slave) |
1. More than 15 Years' Experiece in Manufacturing hmi plc rs232: MOCHUAN, as an integrated industrial automation products supplies, owns mature business business chain: R&D team, qualified production equipments, long-term international logistics cooperators, experienced pre-sale&after-sale engineer team to solve any problem in operating switch sensor, PLC, HMI, VFD and PMSM ac motor.
2. Experienced Engineering Team: besides trade company, Mochuan also is an engineering company. Every our engineer is with experienced practices in electric scheme, electric programming.
3. Realizable Quality: Every product is finished by the strict quality test system and checked by the professional engineer before delivery to ensure customers' benefit.
4. First-class Pre and After Service: professional pre-sale service to confirm each technical request and fully guarantee right product model to save time and money for you.
With four-year developing with each customer's great and kind cooperation each time, Mochuan Drives's foreign business and market has been blooming and thriving, epecially in India, Russia, United States, Canada, United Kingdom, Austrilia, etc..
Q1: Are your hmi plc rs232 quality mature and stable? And which are the industry has run successfully?
Yes, of course, we have CE, CCC and ISO90001 certification. Mature applicable in printing, pharmaceutical, auto manufacturing, electronic power, medical devices etc.
Q2:How many the maximum points can up of your hmi plc rs232?
The smart relay plc at least 14 points, maximum 60 points can extend to 512 points.
Q3: How many voltage are of hmi plc rs232? Whether the voltage can be customized according customers?
The input voltage AC110V~AC240V, DC24V. Or according to customer .
Q4: What is guarantee of your hmi plc rs232?
All series PLC to provide 18months warranty and lifetime maintenance .
Q5:What information should provide, if want to get a quotation?
You could tell us your requirements and usage or Mochuan models