steel pipe seam induction welding machine

compositionThe whole set of high frequency solid state inductiong welding equipment is composed of switch rectifying cabinet,  inverter  output cabinet, central control console, 2-D adjustable bracket device , water cooling system and one set air conditioner.1.Switch Rectifying CabinetWe integrate the switch gear cabinet part and rectifier part, besides the functions of switch cabinet, this design also has rectifying control functions on solid-state H.F. welders.Install incoming disconnect switch ,incoming current meter, voltage meter(switchable)and incoming voltage indicating light.Install 3-phase full-controllable thyristor rectifying bridge to achieve power regulation of H.F. welders.Install flight wave reactor, flight capacitor and filter to increase flight coefficient.2.Inverter Output CabinetThe invert part is considered of MOSFET single phase invert bridge in parallel style. Each bridge’s design power is 120 KW/60KW. We adopt building block mode to pile up power,it is very convenient to install and maintain because every single bridge board is designed as drawer structure consisted of slideway.We adopt matching transformer to realize power combination, also we adopt sub-resonance, no-welding transformer output mode and make resonance directly by tank resonance capacitor(low voltage)and inductor to achieve steel pipe welding power transmission by output lead.Use sealed box and install overhead air conditioning.