Laboratory Water Chiller SUNDI -60℃~300℃

-60℃～300℃

A fully closed piping design, high efficiency plate heat exchanger used to reduce the demand for the thermal fluid utilization while providing the system to achieve the rapid ups and downs in temperature The whole system is a closed liquid circulation system with the expansion of container, expansion of the container and the liquid circulation is adiabatic, and do not participate in liquid circulation, only mechanical connection, regardless of the temperature is a high temperature or low temperature, the tank temperature is limited to 60℃. Therefore, during the process the risk of imbibing and volatilization of the heat conducting medium is reduced. There following advantages for the user.

Model		SUNDI-655WV	SUNDI-675WV	SUNDI-6A10WV	SUNDI-6A15WV	SUNDI-6A25WV

Temp. range		-60℃～+300℃ (system add pressure 3BAR)
Control Mode		Feedback PID + Our special dynamic control calculation, PLC controller
Temp. control		Process temp control and jacket temp control model
Temp. difference		Set or control the temperature difference between jacket oil and raw material process
Program Editor		10 programs, each program can edit 42 steps.
Communication Portocol		MODBUS RTU Protocol, RS485 interface
Material temp. feedback		PT100 OR 4～20mA or communication（normal: PT100)
Temp. feedback		The temp of three points: the inlet and outlet of equipment, reactor material temp(external temp sensor)
Medium temp. acccuracy		±0.5℃
Material temp. accuracy		±1℃
Heating power kW		5.5	7.5	10	15	25
Cooling capacity kW at	300℃	5.5	7.5	10	15	25
	100℃	5.5	7.5	10	15	25
	20℃	5.5	7.5	10	15	25
	-20℃	4.8	6	8.2	12	25
	-40℃	2.3	3.1	4.8	7.8	18
	-55℃	0.75	0.9	1.5	2.8	6
Circulation pump maxL/min bar		50	50	110	110	150
		2	2	2.5	2.5	2.5
Pump		LNEYA magnetic drive pump
Compressor		Tecumseh closed compressor		Dorin semi-closed compressor
Expansion valve		Emerson thermal expansion valve/Emerson electronic expansion valve/danfoss thermal expansion valve.
Evaporator		DANFOSS/KAORI Plate heat exchanger
Operation Panel		7-inch touch screen，show temp curve\EXCEL data output
Safety protection		Self-diagnosis function; freezer overload protection; high pressure switch, overload relay,thermal protection device, liquid low level protection, high temperature protection and temperature fault protection.
Closed circulation system		The whole system is full closed circulation, there is no oil mist at high temperature and no water vapor at low temperature, pressure do not rise up when system is running. The system will supply oil automatically at low temperature.
Refrigerant		R404A/R23 mixture，optional: R125/R23 mixture
Connection size		G3/4	G1	G1	G1	DN32 PN10
Water-cooled type W(cooling water@20℃)		1800L/H1.5bar~4bar	2100L/H1.5bar~4bar	3000L/H1.5bar~4bar	4000L/H1.5bar~4bar	8.5m³/H1.5bar~4bar

Dimension cm		5595170	5595170	70100175	80120185	100150185
Weight kg		265	305	340	380	980
Power 380V 50HZ		10kW	14kW	18kW	26kW	40kW

Typical application of refrigeration heating temperature control system

Dynamic thermostatic control of cold and heat source of high pressure reaction kettle, dynamic thermostatic control of double layer glass reaction kettle, and dynamic thermostatic control of cold and hot source of double-layer reactor.Microchannel reactor thermostatic control, small temperature control system, steam - feeding system temperature control, material low temperature aging test.The thermostatic control of the combined chemical cold source heat source, the cooling heating of the semiconductor equipment and the heating temperature of the vacuum chamber are controlled.

Advantages and functions of temperature control system of refrigeration

Temperature range from 120 to 350, performance superior, unique, high - precision, intelligent temperature control.High cooling power from 0.5 to 1200kW, highest production stability and repeatable results.Multi-function alarm system and safety function, use plate heat exchanger, tube type heater to increase heating and cooling rate.7-inch and 10-inch color TFT touch screen graphics display, use magnetic drive pump, no re-seal leakage problem.Full airtight system, extended thermal conductivity liquid life, very wide temperature range, no need to change liquid media.Ultra-high temperature cooling technology can be cooled directly from 300 degrees of high temperature.The principle and the function has many advantages to using staff: because only expansion of cavity in the body heat conduction medium contact with oxygen in the air (and expansion tank temperature at room temperature to 60 degrees), can achieve lower heat conduction medium absorbed by oxidation and the risk of air moisture.No heat conduction medium evaporates at high temperature, and it can be achieved -80 ~ 190 degrees, -70 ~ 220 degrees, -88 ~ 170 degrees, -55 ~ 250 degrees, -30 ~ 300 degree continuous temperature control without pressurization.

Adopt full closed pipe design, adopt high efficiency plate heat exchanger, reducing the demand for heat conduction liquid, improve the heat utilization rate of the system, reach the rapid lifting temperature.Thermal conductive medium in a closed system, with a container, expand the heat-conducting medium not participate in circulation in the container, whether high or low temperatures, expansion tank temperature to room temperature to 60 degrees, can reduce the heat conduction medium in running the risk of absorbing the moisture and volatile.