2kN Electromechanical Universal Testing Machine With Long Travel Extensometer

Quick Detail

Package & Delivery Lead Time

Detailed Description

Electromechanical Testing Machine Single Column 2kN with long travel extensometer to determine elongation ETM203A 2kN single column electromechanical universal testing machine is widely used for rubber and polymer tensile test. Equipped with long travel extensometer, it can dertermine elongation after break. This machine is fully complying with ISO37, ASTM D412. The force calibration complies with ISO 7500 and ASTM E4. New Features Robust linear motion guide increases lateral stiffness and ensure linear crosshead travel. This results in accurate crosshead alignment thus reducing variability in measurement data and producing better overall accuracy Imported servo motor with precise planet-gear speed reducer provides higher driving efficiency, low noise and free of maintenance. No need replace lubricates which has longer working life. Compact design saves lab space High Quality at affordable price Pre-loaded ball screws and heavy duty bearings assure long life with zero backlash as well as linear low force and through zero performance. The result is accurate and repeatable measurements that truly represent the specimen characteristics rather than load frame deficiencies Fully-protected lead screw covers provide longer life and greater operator protection High-speed, low vibration, world-class, maintenance-free, AC servo motor and servo controller Photoelectrical encoder built in servo motor system is for position measurement of crosshead Built-in bidirectional load cell is assembled in the middle crosshead to prevent any collisions and simple to perform compression or tension tests Dual action over-travel limits on all frames provide the highest level of safety and meet all international standards Remote control keypad facilitates test operation Full one-year warranty on parts and labor Free software upgrading Long travel extensometer is useful for determination of elongation at break, especially for rubber and other long deformation materials. The WANCE model HEE802A (long travel) extensometer is a precise device for measuring strain in highly extensible materials such as elastomers, and semi-rigid plastics. The high elongation extensometer is designed to clamp directly onto to a specimen quickly and easily. It will adjust to incremental gauge lengths ranging from 10 mm or 20mm or 25mm to 800 mm. The equipment will accommodates up to 10 in of clamp displacement and is specifically designed to permit testing the sample through rupture without damaging the extensometer or otherwise disrupting the test routine. The extensometer is based on a pair of carefully counterbalanced clamp assemblies which drive a potentiometer through connecting cables. Both clamps move freely but any increase in the separation or differential motion will advance the transducer. The upper and lower specimen clamps are separately counterbalanced and guided on a polished and ground shaft with linear bearings so that none of the extensometers weight is applied to the specimen. Main features: Model: HEE802A Gauge Length: 10mm, 20mm, 25mm, 50mm Measurement range: 10~ 800 mm Resolution: 0.01 mm Accuracy: 1% Machine dimension: - - - - Frame type | Width x Depth x Height A x B x C (mm) | Crosshead travel H (mm) | Front opening space L (mm) | Adapter (mm) | Pin (mm) | Standard | 4905301590 | 1000 | 100 | 20 | 10 | - - - - Specifications: - - - - Model | ETM203 | Type | Type A, single column | Capacity | 2000N | Calibration standard | ISO 7500, Class 1 / Class 0.5 | Force range | 0.2% ~ 100%FS / 0.4% ~ 100%FS | Force accuracy | 1% / 0.5% of reading | Force resolution | 1/500000FS | Position accuracy | 0.5% of reading | Position resolution | 0.042m | Crosshead speed | 0.001 ~ 750mm/min | Crosshead speed accuracy | 1.0% / 0.5% of set speed | Crosshead travel (without grip) | 1000mm | Dimension | 530mm490mm1590mm | Power requirement | Single-phase, 22010% VAC, 50/60Hz, 200W | Weight | 90kg | - - - - Shipping information: - - - - Package | Particleboard pallets and plywood case | Crated dimension (Width x Depth x Height) | 700x700*1850mm | Crated weight | 130kg | - - - -

Basic Company Information

Shenzhen Wance Testing Machine Co., Ltd.

Company Advantage

Detail Company Introduction