Complete Design Roll Die Cutting Machine Low Noise For Paper Cups / Paper Plates

Quick Detail

Package & Delivery Lead Time

Detailed Description

Roll paper die cutting machine for paper cups paper boxes paper plates Main technical parameters 1. Model: FD930*550 2. Die-cutting precision : 0.25mm 3. Rated die-cutting speed: 5000 -6500pcs / hour 4. High speed machine max die-cutting speed: 7800 tickets / hour, low-grade machine max die-cutting speed: 7000 tickets / hour 5. Max die-cutting pressure: 120 tons 6. Max die-cutting size: 900*500mm 7. Min cutting size: 490*350mm 8.Total power of motor: 15kw 9. Host power: 7.5kw 10. dimensions: length 5000mm* width 2500mm* high 1900mm 11. Max roll diameter: 1600mm 12. Power: AC380V, 50HZ 13. Weight: 7.5 tons The steps of operating 1. Before the machine cuts in and starts working, make sure there are no abnormal conditions of the gas path of the electrical system and hydraulic system. 2. Put down the upper arm first, then put the roll paper in the middle of con top. 3. Then raise the upper arm to aim the roll paper core center and fasten the roll, then raise roll paper for 5cm from the ground. 4. Release the traction rollers in the front and the other in the back, hold the paper to penetrate the machine in route, then straighten the roll paper and press the traction rollers for the machine being ready to cuts in. 5. In the condition of no paper in the machine,it must take at least 5min to cut no paper to hit pit every day before the machine cuts in. 6. Before the machine cuts in, press the traction rollers in two sides, adjust the pressure of putting paper, the traction roller pressure and die-cutting pressure. The rotating pressure is suitable when the paper tension is suitable and the pressure needs to be adjust when the roll paper core changes. 7. Traction roller pressure is suitable during0.2-0.3mpa 8. Adjust the triplet pressure to 0.6MPa Structure Device List - - - - No. | COMMODIT | DESCRIPTION | 1 | Handpiece5 Components,Casting Parts | Crossbeam,Lifting Table, The movement Base, Left and Right Wallboard | 2 | Inter-Machine Transmission Device | Worm Gear, Worm | 3 | Chopping Board | NO.65 Manganese Steel | 4 | Automatic Form Receiving Tray | | 5 | Fixing Core Loading Paper | | - - - - Electric Configuration List - - - - No. | MOTOR MODEL | MANUFACTURERS | 1 | Main Motor Y132M-4 | Lichao Shanghai | 2 | Servo Motor 4.5ACA61(with reduction gearbox) | Yaskawa Japan | 3 | Smart Sensor(Color Marks Sensor) | Sick Germany | 4 | Touch Screen DOP-BO7S200 | Wilen | 5 | PLC:DVP | Taida Taiwan | 6 | Traction MotorZF32-2.253 | Zhibao Taiwan | 7 | Frequency Converter 7SKWVFD-B/2.2WVFD-M | Taida Taiwan | 8 | Reduction Gearbox | Germany | 9 | Switch | Schneider,Omron | - - - -

Basic Company Information

ZHEJIANG FEIDA MACHINERY CO.,LTD

Company Advantage

Detail Company Introduction