High Voltage Impulse Voltage Test System , 200 KV / 10 KJ Impulse Generator

Quick Detail

Package & Delivery Lead Time

Detailed Description

200kV / 10kJ High Voltage Impulse Voltage Test System For Lighting Test System instruction Main Parameters for System 1. Nominal voltage: 200kV 2. Rated stage voltage: 100kV 3. Rated energy: 10kJ 4. Impulse capacitance: 0.5F 5. Number of stages: 2 Rated stage capacitance: 1F(each impulse capacitor 1F at 100kV, total 2pcs) Impulse voltage waveform: generated when load capacitance is 300-3000pF. T1=1.2s30%, T2=50s20%, standard lightning impulse voltage full waveform of peak voltage deviation3%; Standard operation waveform 25020%/250060%. These 2 Impulse voltage waveform parameters and error are accorded with national requirements of IEC standard. 1. Voltage utilization factor: Standard lightning impulse voltage waveform 90% when load capacitance is below 1000pF, standard operation impulse voltage waveform80% when load capacitance is below 2000pF. 2. Standard operation impulse voltage waveform 70%. 3. Locking range: level voltage is within the range of 20%-100% rated voltage, positive and negative locking range no less than 25%. 4. Out-of-control rate of synchronous discharge: <5% 5. Min. output voltage: 20% of rated voltage. 6. Instability of discharge voltage: <1.0% 7. Continuous time: Above 2/3 of rated voltage, continuous working when charge and discharge once every 120s. Below 2/3 of rated voltage, continuous working when charge and discharge once every 60s. More details please contact Sansion Power by email for further information.

Basic Company Information

Sansion Power Electric Co., Ltd.

Company Advantage

Detail Company Introduction