Power Plants Seamless Steel PipeMedium Pressure Random / Fixed Length

Quick Detail

Package & Delivery Lead Time

Detailed Description

Power Plants Seamless Steel Pipe Medium Pressure Random / Fixed Length XOOS is providing high pressure P11 seamless pipes, mostly used in power plants. The products are supplied with 3.1 certificates, according to EN 10204. Certification according to 3.2 can be agreed at the time of order. 1. Application: For the low and medium pressure boiler and steam header pipes; For the high-pressure boiler and steam pipes, and the petrochemical industry pipes; Power plant; Chemical Fertilizer; Petrochemicals; Offshore Oils; Gas Productions; Refineries and etc. 2. Standards: ASTM A335 Standard Specification for Seamless Ferritic Alloy-Steel Pipe for High-Temperature Service 3. Ordering Information Quantity (feet, meters, or number of lengths), Name of material (seamless alloy steel pipe), Grade (P11), Manufacture (hot-finished or cold-drawn), Size using one of the following: NPS and schedule number; Outside diameter and nominal wall thickness; Outsider diameter and minimum wall thickness; Inside diameter and nominal wall thickness; Inside Diameter and minimum wall thickness. Length (specific or random) End finish (plain end or bevel end) 4. Chemical Requirements - - - - Chemical Requirements | Grade | UNS Designation | Composition, % | C | Mn | P max | S max | Si | Cr | Mo | Others | P11 | K11597 | 0.05-0.15 | 0.30-0.60 | 0.025 | 0.025 | 0.50-1.00 | 1.00-1.50 | 0.44-0.65 | ... | - - - - 5. Available Size Range - - - - OD | Thickness | mm | inch | mm | SCH | 21.3~1422 | 1/2''~ 56'' | 2.11~140 | SCH10 | *If the steel grades and size you are looking for are not listed above, please contact us for further information. | - - - - 6. Tensile Requirements Tensile Strength min.: 60ksi / 415MPa Yield Strength min.: 30ks / 205MPa 7. Inspection & Test Chemical composition, mechanical properties ( tensile strength, yield strength, elongation, flaring, flattening, bending, hardness, impact test), surface and dimension, NDE, hydrostatic test. 8. Manufacture Hot Rolled or Cold Drawn 9. Manufacturing Process Raw Material Inspection Cold Centering Heating Piercing & Rolling SIzing Heat Treatment Testing Finishing NDE Visual & Dimension Inspection Marking Storing & Shipping 10. Supplementary Requirements - - - - S1. Product Analysis | S2. Transverse Tension Tests | S3. Flattening Test | S4. Metal Structure and Etching Tests | S5. Photomicrographs | S6. Photomicrographs for Individual Pieces | - - - -

Basic Company Information

Xi an Overseas Oilfield Services Co., Ltd.

Company Advantage

Detail Company Introduction