Semi Automatic Tool Grinding Machine For Cutting PCD PCBN CVD Tungsten Carbide

Quick Detail

Package & Delivery Lead Time

Detailed Description

Semi-automatic tool grinder machine is designed for cutting PCD, PCBN, CVD, tungsten carbide Main Technical Parameters: 1. Spindle and Grinding Wheel - - - - Diameter of Grinding wheel | 150mm | Direct Drive Spindle with Water Cooling | 3KW | RPM of Grinding Spindle | 03,000RPM | Changeable Clearance Angle | -5~25 | Grinding wheel center hole | 40mm | Spindle Center Height | 150mm | - - - - 2.Grinding Wheel Oscillation System(X Axis) - - - - PLC Numerical Controlled Oscillation and Control on the Panel | Max. Oscillation Range | 30mm | Max. Oscillation Frequency | 60times/min | - - - - 3.CCD Monitoring System - - - - Max Magnification of Optical Microscope | 4 times | Magnification of CCD Measuring System | 80times | Industrial Displayer | 15 | CCD Image Resolution | 1280*1024 | - - - - 4.Feed and Rotation System - - - - Compressor of Air Braking on Rotation Axis | 6bar | Tool rotation (B axis) controlled by PLC. Can be switched to manual mode. | LCD input | Horizontal Transverse (Y Axis) Driven by Air | 70mm | Linear Encoder Resolution (X Axis and Y Axis) | 0.001mm | - - - - 5.Power Supply and Dimensions - - - - Coolant Tank with Filter Paper | about70L | Electrical Supply | 12Kw | Voltage Requested | 380V/Three phase /50Hz | Overall Dimensions LWH | 170011501970mm | Weight With Coolant Tank | 2000Kg | - - - - Technology breakthrough: 1. Dual-position design: the machine's two stations, can easily operate and observe. Positive station (axial grinding wheel) to avoid splashing water; side to facilitate the cutting knife and knife and other special tools, grinding. 2. Vertical axis optimization: the micro-adjustment of the vertical axis into the work table in the fixture, greatly enhanced the stability and rigidity of the equipment.

Basic Company Information

Jiangsu Qiangli Machinery Co.,Ltd

Company Advantage

Detail Company Introduction