Hot Pluggable BIDI SFP Fiber Transceiver Durable For Gigabit Ethernet

Quick Detail

Package & Delivery Lead Time

Detailed Description

SFP Transceiver 1.25G BIDI 20Km Tx1310/Rx1550nm Product Features Single LC receptacle optical interface compliant Hot-pluggable SFP footprint 1310nm FP laser transmitter RoHS compliant and Lead Free Up to 20km on 9/125um SMF Metal enclosure for lower EMI Single 3.3V power supply Low power dissipation <600mW Commercial operating temperature range: 0C to 70C Applications Gigabit Ethernet 1.06 Gb/s Fibre Channel Specification Handars HD-SB3512-20LCD Small Form Factor Pluggable (SFP) transceivers are compatible with the Small Form Factor Pluggable Multi-Sourcing Agreement (MSA). They simultaneously comply with Gigabit Ethernet as specified in IEEE STD - - - - I. Pin Descriptions | | Pin | Symbol | Name/Description | Ref. | 1 | VeeT | Transmitter Ground (Common with Receiver Ground) | 1 | 2 | TX Fault | Transmitter Fault | | 3 | TX Disable | Transmitter Disable. Laser output disabled on high or open. | 2 | 4 | MOD_DEF(2) | Module Definition 2. Data line for Serial ID. | 3 | 5 | MOD_DEF(1) | Module Definition 1. Clock line for Serial ID. | 3 | 6 | MOD_DEF(0) | Module Definition 0. Grounded within the module. | 3 | 7 | Rate Select | No connection required | | 8 | LOS | Loss of Signal indication. Logic 0 indicates normal operation. | 4 | 9 | VeeR | Receiver Ground (Common with Transmitter Ground) | 1 | 10 | VeeR | Receiver Ground (Common with Transmitter Ground) | 1 | 11 | VeeR | Receiver Ground (Common with Transmitter Ground) | 1 | 12 | RD- | Receiver Inverted DATA out. AC Coupled | | 13 | RD+ | Receiver Non-inverted DATA out. AC Coupled | | 14 | VeeR | Receiver Ground (Common with Transmitter Ground) | 1 | 15 | VccR | Receiver Power Supply | | 16 | VccT | Transmitter Power Supply | | 17 | VeeT | Transmitter Ground (Common with Receiver Ground) | 1 | 18 | TD+ | Transmitter Non-Inverted DATA in. AC Coupled. | | 19 | TD- | Transmitter Inverted DATA in. AC Coupled. | | 20 | VeeT | Transmitter Ground (Common with Receiver Ground) | 1 | | | | | | - - - - Notes: # # Circuit ground is internally isolated from chassis ground. # Laser output disabled on TX Disable >2.0V or open, enabled on TX Disable<0.8V. # Should be pulled up with 4.7k - 10kohms on host board to a voltage between 2.0V and 3.6V. MOD_DEF(0) pulls line low to indicate module is plugged in. # # LOS is LVTTL output. Should be pulled up with 4.7k 10kohms on host board to a voltage between 2.0V and 3.6V. Logic 0 indicates normal operation; logic 1 indicates loss of signal. - - - - II. Absolute Maximum Ratings | | Parameter | Symbol | Min | Typ | Max | Unit | Ref. | Maximum Supply Voltage | Vcc | -0.5 | | 4.0 | V | | Storage Temperature | TS | -40 | | 100 | C | | Case Operating Temperature | TOP | 0 | | 70 | C | | Relative Humidity | RH | 0 | | 85 | % | 1 | | | | | | | | | - - - - - - - - III. Electrical Characteristics (TOP=25C, Vcc=3.3Volts) | | Parameter | Symbol | Min | Typ | Max | Unit | Ref. | Supply Voltage | Vcc | 3.00 | | 3.60 | V | | Supply Current | Icc | | 180 | 300 | mA | | Transmitter | | | | | | | Input differential impedance | Rin | | 100 | | | 2 | Single ended data input swing | Vin, pp | 250 | | 1200 | mV | | Transmit Disable Voltage | VD | Vcc 1.3 | | Vcc | V | | Transmit Enable Voltage | VEN | Vee | | Vee+ 0.8 | V | | Transmit Disable Assert Time | | | | 10 | us | | Receiver | | | | | | | Single ended data output swing | Vout, pp | 300 | 400 | 800 | mV | 3 | Data output rise time | tr | | | 300 | ps | 4 | Data output fall time | tf | | | 300 | ps | 4 | LOS Fault | VLOS fault | Vcc 0.5 | | VccHOST | V | 5 | LOS Normal | VLOS norm | Vee | | Vee+0.5 | V | 5 | Deterministic Jitter Contribution | RXDJ | | | 80 | ps | 6 | Total Jitter Contribution | RXTJ | | | 122.4 | ps | | | | | | | | | | - - - - Notes: # # Non condensing. # AC coupled. # Into 100 ohm differential termination. # 20 80 % # LOS is LVTTL. Logic 0 indicates normal operation; logic 1 indicates no signal detected. # Measured with DJ-free data input signal. In actual application, output DJ will be the sum of input DJ and DJ. - - - - IV. Optical Characteristics (TOP=25C, Vcc=3.3 Volts) | | Parameter | Symbol | Min | Typ | Max | Unit | Ref. | Transmitter | | | | | | | Output Opt. Power | PO | -9 | - | -3 | dBm | 1 | Optical Wavelength | | 1290 | 1310 | 1330 | nm | 2 | Spectral Width | | - | - | 3 | nm | 2 | Optical Rise/Fall Time | tr/tf | - | 170 | 260 | ps | 4 | Deterministic Jitter Contribution | TXDJ | - | 20 | 56.5 | ps | 5 | Total Jitter Contribution | TXTJ | - | 50 | 119 | ps | | Optical Extinction Ratio | ER | 9 | - | - | dB | | Receiver | | | | | | | Average Rx Sensitivity @ 1.25 Gb/s (Gigabit Ethernet) | RSENS2 | - | - | -24 | dBm | 6, 7 | Average Rx Sensitivity @ 1.06 Gb/s (1X Fibre Channel) | RSENS1 | - | - | -25 | dBm | 6, 7 | Maximum Received Power | RXMAX | 0 | | | dBm | | Optical Center Wavelength | C | 1470 | 1490 | 1510 | nm | | LOS De-Assert | LOSD | - | - | -25 | dBm | | LOS Assert | LOSA | -36 | - | - | dBm | | LOS Hysteresis | | 0.5 | - | - | dB | | | | | | | | | | - - - - Notes: # # Class 1 Laser Safety. # Also specified to meet curves in FC-PI-2 Rev. 10.0 Figure 18, which allow trade-off between wavelength, spectral width. # Equivalent extinction ratio specification for Fibre Channel. Allows smaller ER at higher average power. # Unfiltered, 20-80%. Complies with IEEE 802.3 (Gig. E) and FC 1x eye masks when filtered. # Measured with DJ-free data input signal .In actual application, output DJ will be the sum of input DJ and DJ. # Measured with conformance signals defined in FC-PI-2 Rev. 10.0 specifications. # Measured with PRBS 27-1 at 10-12 BER . - - - - V. General Specifications | | Parameter | Symbol | Min | Typ | Max | Units | Ref. | Data Rate | BR | 1062 | | 1250 | Mb/sec | 1 | Bit Error Rate | BER | | | 10-12 | | 2 | Max. Supported Link Length on 9/125m SMF @ 1x Fibre Channel | LMAX1 | | | 20 | km | 3, 4 | Max. Supported Link Length on 9/125m SMF @ Gigabit Ethernet | LMAX2 | | | 20 | km | 3, 4 | | | | | | | | | - - - - Notes: # # Gigabit Ethernet and 1x Fibre Channel compliant. # Tested with a PRBS 27-1 data pattern. # Dispersion limited per FC-PI-2 Rev. 10 # Attenuation of 0.55 dB/km is used for the link length calculations. Please refer to the Optical Specifications in Table IV to calculate a more accurate link budget based on specific conditions in your application. - - - - VI. Environmental Specifications | - - - - HD Commercial Temperature BIDI SFP transceivers have an operating temperature range from 0C to +70C case temperature. - - - - Parameter | Symbol | Min | Typ | Max | Units | Ref. | Case Operating Temperature | Top | 0 | | 70 | C | | Storage Temperature | Tsto | -40 | | 100 | C | | - - - - - - - - VII. Mechanical Specifications | - - - - HDs Small Form Factor Pluggable (SFP) transceivers are compatible with the dimensions defined by the SFP Multi-Sourcing Agreement (MSA). SFP Transceiver 1.25G BIDI 20Km Tx1310/Rx1550nm

Basic Company Information

Shenzhen Handar Optical Technology Company

Company Advantage

Detail Company Introduction