Customized Printed Circuit Board Heater Tubular / Open Coil / Infrared Type

Quick Detail

Package & Delivery Lead Time

Detailed Description

SMT Reflow Oven Heater heating Chamber Printed circuit board heater process heater for PCB Tutco designed & supplied many kinds of heaters for reflow oven, SMT industrial for Heller & BTU etc, Specifications: # Voltage: 110V-600V # Wattage: 3KW-12KW # Type: Tubular, Open coil & Infrared # Leakage, at rated voltage, between the frame, isolated from ground, and the supply terminals shall not exceed 0.5 milliamps after exposure to 29 to 32 at 85-90% relative humidity for 24 hours and while still under these conditions. # The open coil element must withstand 2000 VAC/60S or 2500V/ 1S between current carrying parts and dead metal, must not be flashover or breakdown # At 322C & 705%RH, the insulating resistance value between current-carrying parts and interconnected non-current-carrying metal parts should be more than 100 M. # Switch off the heater after 10 minutes of heating same as when measuring the power rating. At this point the insulating resistance value when checking the resistance value should be immediately 100M and be 100 M after 10 minutes. # Parts shall be made of SUS304, Mica plate, ceramic, and other high temperature resistance material; # Heating elements shall perform their designed function during normal life testing with the following minimum reliability. There shall be no failures allowed during 3750 hours.

Basic Company Information

Changshu Flex-Tek Thermal Fluid Systems Manufacturer Co., Ltd.

Company Advantage

Detail Company Introduction