Metal Sheet Press Brake

It is well known that the process of bending the metal tube in a widely used way is to fill the tube with sand and then heat it, this method has low labor efficiency, and the shape of the metal tube after bending is different. Then the new type of metal plate bending machine is the basic no-cutting process of metal tube, specifically a metal sheet press brake.

1. The cnc hydraulic metal sheet bending machine does not damage the workpiece: the laser cutting head is not in contact with the material surface to ensure that the workpiece is not scratched.2. The metal bar bending machine has a narrow slit: the laser beam focuses on a small point of light, which causes the focal point to reach a high power density, and the material is quickly heated to the degree of vaporization, which evaporates into the hole. With the relative linear movement of the beam and the material, the hole is continuously formed in a narrow slit. The incision width is generally 0.10 ~ 0.20 mm.3. The metal bender machine improves the development speed of the new product: after the product drawing is formed, the laser processing can be carried out immediately, and the new product can be obtained in the shortest time.4. The bending speed is fast: the cutting speed can reach 10 m/min, and the maximum positioning speed can reach 70 m/min, which is much faster than line cutting. 5. The cutting quality of the metal bender machine is good: no contact cutting, the cutting edge is very small, there is no thermal deformation of the workpiece, it is necessary to avoid the collapse of the material in the cutting.6. The precision of the pipe bending machine is high: the positioning accuracy is 0.05mm and the repeat positioning accuracy is 0.02 mm.7. The metal sheet bending machine is not affected by the hardness of the cut material: laser can be processed to steel plate, stainless steel, aluminum alloy plate, hard alloy, no matter what hardness, no deformation cutting can be carried out.8. The metal plate press brake is not affected by the shape of workpiece: the laser is flexible, it can process any figure, it can cut the pipe and other profiles.9. The sheet metal machinery can cut and process nonmetals: plastic, wood, PVC, leather, textiles, plexiglass, etc.10. The cutting surface of the pipe bender is smooth: the cutting surface has no burrs, and the surface roughness of the incision is generally controlled within Ra12.5.11. The CNC Hydraulic Metal Bender saves materials: computer programming can be used to make the different shapes of products in the whole plate material, and maximize the utilization of materials.12. Saving mold investment in pipe bending machine: laser cutting machine is not needed for mold, no die consumption, no need to repair the mold, saving the time of replacing the mould, thus saving the processing cost, reducing the production cost, especially suitable for the processing of large products.