100Gbps 24F MPO Fiber Optic Cable Multimode OM3 Trunk Polarity B Aqua Patch Cable

Quick Detail

Package & Delivery Lead Time

Detailed Description

100Gbps 24F MPO MTP Mating Fiber Optical Multimode OM3 Trunk Polarity B Aqua Patch Cable SINOis a certified assembler of US Conec MTP connectors. The MTP multifiber connector is a registered trademark for US Conec's design of an MPO connector. The MTP connector is a high performance MPO. US Conec manufactures durable MTP brand connectors that provide quick connection for up to 72 optical fibers. Precision alignment is achieved with patented guide pins combined with the tightly controlled guide pin holes on US Conec's MT ferrules. Removable housings allow for quick change of gender, ferrule cleaning, interferometry or connector re-polishing. US Conec's MTP brand connector components are fully compliant with IEC Standard 61754-7 and TIA 604-5 Type MPO. The three polarity methods Type A, Type B and Type C are used to guarantee the right bi-directional allocation. Specification: - - - - Item | Requirements | Material | LSZH | Color | Aqua (PANTONE 3248C) Chromatic aberration(E)4 | High temperature aging test | Un-aged mechanical performance | Tensile strength, MPa | 10 | Elongation,% | 125 | Aging Conditions | 100C2*240hrs | / | Aged mechanical performance | Tensile strength, MPa | 10 | After tensile strength variation absolute value,% | 20 | Elongation,% | 100 | Aging elongation variation absolute value,% | 20 | Resistance environmental stress cracking (50C2C for 96h,IEC 60811-4-1) | Failure: 0/10 | - - - - - - - - Connector 1(MPO/PC) | Connector 2(DLC/PC) | ITEM | Requirements | ITEM | Requirements | Ferrule surface x-angle (GX) | -0.2~0.2 | Fiber height (A,note5) | -100nm~Amax (note 6) | Ferrule surface y-angle(GY) | -0.2~0.2 | Radius of curvature(B) | 5mm~30mm | Ferrule surface x-radius(RX) | | Apex offset(C) | 0~70m | Ferrule surface y-radius(RY) | | Ferrule diameter | 1.2485mm~1.2495mm | Fiber height(H) | 1um~3.5um | / | / | Adjacent fiber height difference(HB) | 0~0.3um | / | / | All fiber height difference(HA) | 0~0.5um | / | / | - - - - - - - - Item | Unit | Requirement | | Fiber type | | A1a.2(OM3) | Core diameter | Nominal value | m | 50 | Tolerance | m | 2.5 | Cladding diameter | Nominal value | m | 125.0 | Tolerance | m | 2 | Core concentricity error | m | 3 | Cladding non-circularity | | 2% | Core non-circularity | | 6% | Coating diameter | Nominal value | m | 245 | Tolerance | m | 10 | Coating-cladding concentricity error | m | 12.5 | Uncabled fiber macrobending loss | Radius(mm) | mm | 15 | 7.5 | Number of turns | / | 2 | 2 | Max. at 850 nm | dB | 0.1 | 0.2 | Max. at 1300 nm | dB | 0.3 | 0.5 | Min. mode bandwidth | Overfilled launch bandwidth at 850nm | | 1500 MHz.km | Overfilled launch bandwidth at 1300nm | | 500 MHz.km | Effective laser launch bandwidth at 850nm | | 2000 MHz.km | Min. proof stress | GPa | 0.69 | Dynamic fatigue parameter | | 20 | Chromatic dispersion coefficient | 0min | | 1295 nm | 0max | | 1340 nm | S0max(from1295nm01310nm) | | 0.105ps/nm2km | S0max(from1310nm01340nm) | | 0.000375(1590-0) ps/nm2km | Other parameter meet standard | | IEC60793-2-10 | - - - - Features: 1. Available in OS1/2, OM2, OM3 and OM4; 2. Available in FC,LC, SC, ST, MU, and MTP; 3. Interface polished type has PC, UPC and APC; 4. Available in 12/24/36/48/72/96/144-fibers; 5. 100% factory tested; 6. Discrete connectors are heat-cured and use ceramic ferrules and sleeves; 7. Fan-out fibers from MPO/MTP connectors into individual simplex or duplex; 8. Customized for length, staggering, connector type, breakout style, fiber count, and labeling fiber. Application: 1. The data centra application with high dense degree environment; 2. The optical fiber to the building; 3. The internal connector application in fiber equipment such as Splitter, 40G/100G SFP and SFP. 12MT MM OM4 3D Interferometry: 24MT SM OS2 3D Interferometry: Related Products:

Basic Company Information

Sino Fibre Optic Co.,Limited Company

Company Advantage

Detail Company Introduction