5 Pin SMT PCB Mount Port Waterproof Micro USB Connector , FemaleMicro B USB Connector

Quick Detail

Package & Delivery Lead Time

Detailed Description

5 Pin SMT PCB Mount Port Waterproof Micro USB Connector , Female Micro B USB Connector Features: 1. With A Type/B Type/Mini USB variety of types of public Socket Interface Design; 2. Installed in the form of DIP/SMT/clip wire/wire type available; 3. Flexible design of terminal contact area to ensure good contact performance and long life requirements; 4. Meet a variety of welding equipment parameters temperature requirements Welding conditions 1. Hand soldering Use a soldering iron of 30 watts, controlled at 350 C approximately 3 seconds while solder applying. 2. Wave soldering/Reflow Soldering The peak temperature of the wave oven should be set to 260 C max. Condition for soldering temperature Material 1. Housing: PBT White/Black 2. Terminal: Phosphor Bronze Plating Gold/Tin 3. Shell: BRASS Plating Ni Applications: The can be used in mobile phones, CD players, cordless telephones, MP3, MP4 PDA notebooks, DVD and digital camera. Specification - - - - Eelectrical Characteristics | Contact Curren Rating | 0.5A Min. | Voltage Rating | 40V AC (rms) | Withstanding Voltage | 500V AC for 1 Min. | Insulation Resistance | 100 Megaohms Min. | Contact Resistance | 30 m Max. | Mechanical Characteristics | Insertion Force | 44.1 N (4.5kgf) Max | Withdrawal Force | 9.8 N (1.0kgf) Min.,3 9.2N( 4.0kgf) Max. | Durability | 10000 cycles at 10050 cycles per hour | Environmental Characteristics | Operating Temperature | -25C to +85C | - - - - Inspection for USB Connector - - - - Test Description | Requirement | Procedure | Visual Inspection | The inspection results should be compliant with the individual specification | Before the qualification test, all these components shall be examined the Features, Construction as per applicable specification and documents | - - - - Mechanical Performance - - - - Test Description | Requirement | Procedure | Terminal / Housing Retention Force | 0.40kgf /Pin Min. | Measure the contact retention | Insertion Force & Withdrawal Force | Insertion Force: 4.50kgf Max. Withdrawal Force: 1.00kgf Min. | The specimen is mounted to mounting fixtures by the normal mounting means. The peak force shall be recorded at the maximum rate of 25mm per minute | Durability | After 10000 cycles test, shall be no evidence of mechanical or electric defects, and shall meet the requirements of connector using. | 10000 insertion / extraction cycles at a maximum rate of 10050 cycles per hour. | - - - -

Basic Company Information

Dongguan ShuangYi Electronic Technology Manufacturing Limited

Company Advantage

Detail Company Introduction