Light Weight 1 Mm Pitch Connector , DC Current Rating Connector Wire To Board

Quick Detail

Package & Delivery Lead Time

Detailed Description

1, Product's specification details - - - - Basic size information | Color | White | Pitch | 1.0mm | Housing Material | Nylon66 UL94V-0 | Application | Signal, wire to board | Wire Insulation Diameter | 0.80mm max. | Terminal processing method | E-stamping before tin-plated or gold-flash | | Electricalproperties | Current Rating | 1A AC, DC | Voltage Rating | 50V AC, DC | Contact Resistance | 30m Max | Insulation Resistance | 100m min | Withstanding Voltage | 500V AC/minute | | Mechanical properties | Temperature range | -25 to 85 | Terminal Insertion Force | 0.50kgf (Max.) | Terminal/Housing Retention Force | 0.50kgf (Min.) | Pin Retention Force | 0.50kgf (Min.) | | Other information please kindly check the following picture. | - - - - 2, R[elevant]engineering drawing and testreport The next attachment is detailed product file for your reference, it will be helpful to you. 3, Main testing report 3. Ratings & Applicable Wires - - - - Item | Standard | Rated Voltage (Max.) | 50V AC/DC | Insulation O.D. 0.80mm (Max.) | Rated Current (Max.) And Applicable Wires | AWG#28 | 1A AC/DC | AWG#30 | 1A AC/DC | AWG#32 | 0.5A AC/DC | Ambient Temperature Range | -25 ~ +85* | - - - - *: Including terminal temperature rise 4. Electrical Performance - - - - Test Description | Procedure | Requirement | 4-1 | Contact Resistance | Mate connectors, measure by dry circuit, 20mV max., 10mA.(Based upon JIS C5402 5.4) | 20m (Max.) | 4-2 | Insulation Resistance | Mate connectors, apply 500V DC between adjacent terminal or ground. (Based upon JIS C5402 5.2/MIL-STD-202 Method 302 Cond. B) | 100M (Min.) | 4-3 | Dielectric Withstanding Voltage | Mate connectors, apply 250V AC (rms) for 1 minute between adjacent terminal or ground. (Based upon JIS C5402 5.1/MIL-STD-202 Method 301) | No Breakdown. | 4-4 | Contact Resistance on Crimped Portion | Crimp the applicable wire on to the terminal, measure by dry circuit, 20mV (Max.)., 10mA. | 5m (Max.) | - - - - 5. Mechanical Performance - - - - Test Description | Procedure | Requirement | 5-1 | Actuator Insertion & Withdrawal Force | Insert and withdraw connectors at the speed rate of 253mm / minute. | Refer to paragraph 7 | 5-2 | Crimping Pull Out Force | Fix the crimped terminal, apply axial pull out force on the wire at the speed rat of 253mm / minute.(Based upon JIS C5402 6.8) | AWG#28 | 1.0kgf (Min) | AWG#30 | 0.8kgf (Min) | AWG#32 | 0.5kgf (Min) | 5-3 | Terminal Insertion Force. | Insert the crimped terminal into the housing. | 0.50kgf (Max.) | 5-4 | Terminal/Housing Retention Force. | Apply axial pull out force at the speed rate of 253mm / minute on the terminal assembled in the housing. | 0.50kgf (Min.) | 5-5 | Pin Retention Force | Apply axial push force at the speed rate of 253mm / minute | 0.50kgf (Min.) | 5-6 | Durability | When mated up to 50 cycles repeatedly by the rate of 10 cycle per minute. | Contact Resistance 40m (Max.) | 5-7 | Vibration | Amplitude: 1.5mm P-P Sweep time: 10-55-10 Hz in 1 minute Duration: 2 hours in each X.Y.Z. axes. (Based upon MIL-STD-202 Method 201A) | Appearance No Damage. Contact Resistance 40m (Max.) Discontinuity 1 sec.(Max.) | 5-8 | Physical Shock | 490m/s50G,3 strokes in each X.Y.Z. axes. (Based upon JIS C0041/MIL-STD-202 Method 213B Cond. A) | - - - -

Basic Company Information

Dongguan Xinpei Plastic Metal Electronic Limited

Company Advantage

Detail Company Introduction