1A AC/DC PCB Connector Phosphor Bronze Contact, Gold-flash Crimp Terminals

Quick Detail

Package & Delivery Lead Time

Detailed Description

1, The specification of the product including basic size information, electrical and mechanical properties. - - - - Basic size information | Color | yellow | Suitable housing | A1003H-NP | Part No. | A1003-T | Package | 15K pcs/reel | Insulation O.D. | 0.80mm(Max) | | | | Electricalproperties | Current Rating | 1A AC, DC | Voltage Rating | 50V AC, DC | Contact Resistance | 30m Max | Insulation Resistance | 100m | Withstanding Voltage | 500V AC/minute | | Mechanical properties | Temperature range | -25 to 85 | Other data is in following report picture | - - - - 2, Related engineering drawing and testing report Attached picture is the engineering drawing and report of A1003T terminals, it will be convenient for you to confirm the product, please kindly review it. Thanks!!! - - - - 1. Scope This specification covers the requirements for product performance of 1.00mm pitch wire to board connectors series. 2. Construction,Dimensions,Material & Plating See the attached drawings 3. Ratings & Applicable Wires - - - - Item | Standard | Rated Voltage (Max.) | 50V AC/DC | Insulation O.D. 0.80mm (Max.) | Rated Current (Max.) And Applicable Wires | AWG#28 | 1A AC/DC | AWG#30 | 1A AC/DC | AWG#32 | 0.8A AC/DC | Ambient Temperature Range | -25 ~ +85* | - - - - *: Including terminal temperature rise 4. Electrical Performance - - - - Test Description | Procedure | Requirement | 4-1 | Contact Resistance | Mate connectors, measure by dry circuit, 20mV max., 10mA.(Based upon JIS C5402 5.4) | 20m (Max.) | 4-2 | Insulation Resistance | Mate connectors, apply 500V DC between adjacent terminal or ground. (Based upon JIS C5402 5.2/MIL-STD-202 Method 302 Cond. B) | 100M (Min.) | 4-3 | Dielectric Withstanding Voltage | Mate connectors, apply 250V AC (rms) for 1 minute between adjacent terminal or ground. (Based upon JIS C5402 5.1/MIL-STD-202 Method 301) | No Breakdown. | 4-4 | Contact Resistance on Crimped Portion | Crimp the applicable wire on to the terminal, measure by dry circuit, 20mV (Max.)., 10mA. | 5m (Max.) | - - - - 5. Mechanical Performance - - - - Test Description | Procedure | Requirement | 5-1 | Actuator Insertion & Withdrawal Force | Insert and withdraw connectors at the speed rate of 253mm / minute. | Refer to paragraph 7 | 5-2 | Crimping Pull Out Force | Fix the crimped terminal, apply axial pull out force on the wire at the speed rat of 253mm / minute.(Based upon JIS C5402 6.8) | AWG#28 | 1.0kgf (Min) | AWG#30 | 0.5kgf (Min) | AWG#32 | 0.3kgf (Min) | 5-3 | Terminal Insertion Force. | Insert the crimped terminal into the housing. | 0.50kgf (Max.) | 5-4 | Terminal/Housing Retention Force. | Apply axial pull out force at the speed rate of 253mm / minute on the terminal assembled in the housing. | 0.50kgf (Min.) | 5-5 | Pin Retention Force | Apply axial push force at the speed rate of 253mm / minute | 0.30kgf (Min.) | 5-6 | Durability | When mated up to 50 cycles repeatedly by the rate of 10 cycle per minute. | Contact Resistance 40m (Max.) | 5-7 | Vibration | Amplitude: 1.5mm P-P Sweep time: 10-55-10 Hz in 1 minute Duration: 2 hours in each X.Y.Z. axes. (Based upon MIL-STD-202 Method 201A) | Appearance No Damage. Contact Resistance 40m (Max.) Discontinuity 1 sec.(Max.) | 5-8 | Physical Shock | 490m/s50G,3 strokes in each X.Y.Z. axes. (Based upon JIS C0041/MIL-STD-202 Method 213B Cond. A) | - - - - | 6. Environmental Performance And Others - - - - Test Description | Procedure | Requirement | 6-1 | Temperature Rise | Carrying rated current load.(Based upon UL 498) | 30(Max.) | 6-2 | Heat Resistance | 852,96 hours (Based upon JIS C0021/MIL-STD-202 Method 108A Cond. A) | Appearance No Damage. Contact Resistance 40m (Max.) | 6-3 | Cold Resistance | -253,96 hours (Based upon JIS C0020) | 6-4 | Humidity | Temperature: 402 Relative Humidity : 90~95% Duration: 96 hours (Based upon JIS C0022/MIL-STD-202 Method 103B Cond. B) | Appearance No Damage. Contact Resistance 40m (Max.) Insulation Resistance 10M (Min.) Dielectric Withstanding Voltage Must meet 4-3 | 6-5 | Temperature Cycling | 5 cycles of: a) -55 30 minutes b) +85 30 minutes (Based upon JIS C0025) | Appearance No Damage. Contact Resistance 40m (Max.) | 6-6 | Salt Spray | Tin-plated 12 hours / Gold- plated 24 hours exposure to a salt spray from the 51% solution at 352. (Based upon JIS C0023/MIL-STD-202 Method 101C Cond. B) | 6-7 | SO2 Gas | 24 hours exposure to 505ppm. SO2 gas at 402. | 6-8 | NH3 Gas | 40 minutes exposure to NH3 gas evaporating from 28% Ammonia solution. | - - - - - - - - 6-9 | Solderability | Soldering Time: 50.5 sec. Solder Temperature: 2455 | Solder Wetting 95% of immersed area must show no voids, pin holes | 6-10 | Resistance to Soldering Heat | When reflowing Refer to paragraph 8 Solder iron method Soldering Time: 50.5 sec. Solder Temperature: 370 ~ 400 | Appearance No Damage. | - - - - 7. Actuator Insertion/Withdrawal Force [Unit : kgf] - - - - Circuits | At Initial | Insertion (Max.) | Withdrawal (Min.) | Single | 0.20 | 0.03 | 2X08 | 3.40 | 0.49 | 2X10 | 4.00 | 0.55 | 2X15 | 5.50 | 0.70 | 2X16 | 5.80 | 0.73 | 2X20 | 7.00 | 0.85 | 2X25 | 8.50 | 1.00 | - - - - | - - - - 3, Our main customer and partner This product is widely used in household appliance, computer, communication device. Because we can controll defective rate under a very low value, so our parts are accepted by famouse and international company like TPV, LeTV, Emerson, Amphenol Corporation, Skyworth, LuXshare, BYD etc. And the all products are certificated by REACH, UL, RoHS. In order to protect the evironment, some parts are halogen free. The below picture will help you to know this directly, thanks!

Basic Company Information

Dongguan Xinpei Plastic Metal Electronic Limited

Company Advantage

Detail Company Introduction